大网数据广告活动
Web 标准与前端开发

AudioWorkletProcessor: process() method

· 52CE 我爱测

The **`process()`** method of an AudioWorkletProcessor-derived class implements the audio processing algorithm for the audio processor worklet.

Web Audio API

The process() method of an AudioWorkletProcessor-derived class implements the audio processing algorithm for the audio processor worklet.

Although the method is not a part of the AudioWorkletProcessor interface, any implementation of AudioWorkletProcessor must provide a process() method.

The method is called synchronously from the audio rendering thread, once for each block of audio (also known as a rendering quantum) being directed through the processor's corresponding AudioWorkletNode. In other words, every time a new block of audio is ready for your processor to manipulate, your process() function is invoked to do so.

[!NOTE] Currently, audio data blocks are always 128 frames long—that is, they contain 128 32-bit floating-point samples for each of the inputs' channels. However, plans are already in place to revise the specification to allow the size of the audio blocks to be changed depending on circumstances (for example, if the audio hardware or CPU utilization is more efficient with larger block sizes). Therefore, you must always check the size of the sample array rather than assuming a particular size.

This size may even be allowed to change over time, so you mustn't look at just the first block and assume the sample buffers will always be the same size.

Syntax

process(inputs, outputs, parameters)

Parameters

  • inputs

    • : An array of inputs connected to the node, each item of which is, in turn, an array of channels. Each channel is a Float32Array containing 128 samples. For example, inputs[n][m][i] will access n-th input, m-th channel of that input, and i-th sample of that channel.

      Each sample value is in range of [-1 .. 1].

      The number of inputs and thus the length of that array is fixed at the construction of the node (see AudioWorkletNode). If there is no active node connected to the n-th input of the node, inputs[n] will be an empty array (zero input channels available).

      The number of channels in each input may vary, depending on AudioNode.channelCount and AudioNode.channelCountMode properties.

  • outputs

    • : An array of outputs that is similar to the inputs parameter in structure. It is intended to be filled during the execution of the process() method. Each of the output channels is filled with zeros by default — the processor will output silence unless the output arrays are modified.
  • parameters

    • : An object containing string keys and Float32Array values. For each custom AudioParam defined using the AudioWorkletProcessor.parameterDescriptors getter, the key in the object is a name of that AudioParam, and the value is a Float32Array. The values of the array are calculated by taking scheduled automation events into consideration.

      If the automation rate of the parameter is "a-rate", the array will contain 128 values — one for each frame in the current audio block. If there's no automation happening during the time represented by the current block, the array may contain a single value that is constant for the entire block, instead of 128 identical values.

      If the automation rate is "k-rate", the array will contain a single value, which is to be used for each of 128 frames.

Return value

A Boolean value indicating whether or not to force the AudioWorkletNode to remain active even if the user agent internal logic would otherwise decide that it's safe to shut down the node.

The returned value lets your processor have influence over the lifetime policy of the AudioWorkletProcessor and the node that owns it. If the combination of the return value and the state of the node causes the browser to decide to stop the node, process() will not be called again.

Returning true forces the Web Audio API to keep the node alive, while returning false allows the browser to terminate the node if it is neither generating new audio data nor receiving data through its inputs that it is processing.

The 3 most common types of audio node are:

  1. A source of output. An AudioWorkletProcessor implementing such a node should return true from the process method as long as it produces an output. The method should return false as soon as it's known that it will no longer produce an output. For example, take the AudioBufferSourceNode — the processor behind such a node should return true from the process method while the buffer is playing, and start returning false when the buffer playing has ended (there's no way to call play on the same AudioBufferSourceNode again).
  2. A node that transforms its input. A processor implementing such a node should return false from the process method to allow the presence of active input nodes and references to the node to determine whether it can be garbage-collected. An example of a node with this behavior is the GainNode. As soon as there are no inputs connected and references retained, gain can no longer be applied to anything, so it can be safely garbage-collected.
  3. A node that transforms its input, but has a so-called tail-time — this means that it will produce an output for some time even after its inputs are disconnected or are inactive (producing zero-channels). A processor implementing such a node should return true from the process method for the period of the tail-time, beginning as soon as inputs are found that contain zero-channels. An example of such a node is the DelayNode — it has a tail-time equal to its DelayNode.delayTime property.

[!NOTE] An absence of the return statement means that the method returns undefined, and as this is a falsy value, it is like returning false. Omitting an explicit return statement may cause hard-to-detect problems for your nodes.

Exceptions

As the process() method is implemented by the user, it can throw anything. If an uncaught error is thrown, the node will emit a AudioWorkletNode.processorerror_event event and will output silence for the rest of its lifetime.

Examples

In this example we create an AudioWorkletProcessor that outputs white noise to its first output. The gain can be controlled by the customGain parameter.

class WhiteNoiseProcessor extends AudioWorkletProcessor {
  process(inputs, outputs, parameters) {
    // take the first output
    const output = outputs[0];
    // fill each channel with random values multiplied by gain
    output.forEach((channel) => {
      for (let i = 0; i < channel.length; i++) {
        // generate random value for each sample
        // Math.random range is [0; 1); we need [-1; 1]
        // this won't include exact 1 but is fine for now for simplicity
        channel[i] =
          (Math.random() * 2 - 1) *
          // the array can contain 1 or 128 values
          // depending on if the automation is present
          // and if the automation rate is k-rate or a-rate
          (parameters["customGain"].length > 1
            ? parameters["customGain"][i]
            : parameters["customGain"][0]);
      }
    });
    // as this is a source node which generates its own output,
    // we return true so it won't accidentally get garbage-collected
    // if we don't have any references to it in the main thread
    return true;
  }
  // define the customGain parameter used in process method
  static get parameterDescriptors() {
    return [
      {
        name: "customGain",
        defaultValue: 1,
        minValue: 0,
        maxValue: 1,
        automationRate: "a-rate",
      },
    ];
  }
}

Specifications

Browser compatibility

This is not a method provided by browsers, but a callback method that must be written in client code.

See also

来源:MDN Web Docs / Mozilla 贡献者 · 作者与贡献记录 · CC BY-SA 2.5。离线整理了版式、链接和媒体显示。

资料来源与适用范围

资料来源
MDN Web Docs / Mozilla 贡献者
适用范围
请按文中版本与环境说明核对
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 2.5

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。