大网数据广告活动
PHP 语言与运行手册

The EvTimer class

· 52CE 我爱测

EvTimer watchers are simple relative timers that generate an event after a given time, and optionally repeating in regular intervals after that.

The EvTimer class

(PECL ev >= 0.2.0)

Introduction

EvTimer watchers are simple relative timers that generate an event after a given time, and optionally repeating in regular intervals after that.

The timers are based on real time, that is, if one registers an event that times out after an hour and resets the system clock to January last year, it will still time out after(roughly) one hour. "Roughly" because detecting time jumps is hard, and some inaccuracies are unavoidable.

The callback is guaranteed to be invoked only after its timeout has passed (not at, so on systems with very low-resolution clocks this might introduce a small delay). If multiple timers become ready during the same loop iteration then the ones with earlier time-out values are invoked before ones of the same priority with later time-out values (but this is no longer true when a callback calls EvLoop::run() recursively).

The timer itself will do a best-effort at avoiding drift, that is, if a timer is configured to trigger every 10 seconds, then it will normally trigger at exactly 10 second intervals. If, however, the script cannot keep up with the timer because it takes longer than those 10 seconds to do) the timer will not fire more than once per event loop iteration.

Class synopsis

class EvTimer extends EvWatcher {
/* Properties */
public $repeat;
public $remaining;
/* Inherited properties */
public $is_active;
public $data;
public $is_pending;
public $priority;
/* Methods */
public function __construct(
     float $after ,
     float $repeat ,
     callable $callback ,
     mixed $data = null ,
     int $priority = 0
)
public function again(): void
final public static function createStopped(
     float $after ,
     float $repeat ,
     callable $callback ,
     mixed $data = null ,
     int $priority = 0
): EvTimer
public function set( float $after , float $repeat ): void
/* Inherited methods */
public function EvWatcher::clear(): int
public function EvWatcher::feed( int $revents ): void
public function EvWatcher::getLoop(): EvLoop
public function EvWatcher::invoke( int $revents ): void
public function EvWatcher::keepalive( bool $value = ?): bool
public function EvWatcher::setCallback( callable $callback ): void
public function EvWatcher::start(): void
public function EvWatcher::stop(): void
}

Properties

repeat

If repeat is 0.0, then it will automatically be stopped once the timeout is reached. If it is positive, then the timer will automatically be configured to trigger again every repeat seconds later, until stopped manually.

remaining

Returns the remaining time until a timer fires. If the timer is active, then this time is relative to the current event loop time, otherwise it's the timeout value currently configured.

That is, after instantiating an EvTimer with an after value of 5.0 and repeat value of 7.0, remaining returns 5.0. When the timer is started and one second passes, remaining will return 4.0. When the timer expires and is restarted, it will return roughly 7.0 (likely slightly less as callback invocation takes some time too), and so on.

Table of Contents

来源:PHP Documentation Group · 作者与贡献记录 · CC BY 3.0。离线整理了版式、链接和媒体显示。

资料来源与适用范围

资料来源
PHP Documentation Group
适用范围
请按文中版本与环境说明核对
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。