大网数据广告活动
服务器运维问答

Optimal value for Nginx worker_connections

· 52CE 我爱测

Nginx worker_connections "sets the maximum number of simultaneous connections that can be opened by a worker process. This number includes all connections (e.g. connections with proxied servers, among others), not only connection…

问题原文

原帖链接 · Aarti · CC BY-SA 3.0

Nginx worker_connections "sets the maximum number of simultaneous connections that can be opened by a worker process. This number includes all connections (e.g. connections with proxied servers, among others), not only connections with clients. Another consideration is that the actual number of simultaneous connections cannot exceed the current limit on the maximum number of open files". I have few queries around this:

  1. What should be the optimal or recommended value for this?
  2. What are the downsides of using a high number of worker connections?

社区高分解答

原帖链接 · user5994461 · CC BY-SA 3.0

Let's take the pragmatic approach.

All these limits are things that were hardcoded and designed in the past century when hardware was slow and expensive. We're in 2016 now, an average wall-mart toaster can process more requests than the default values.

The default settings are actually dangerous. Having hundreds of users on a website is nothing impressive.

worker_process

A related setting, let's explain it while we're on the topic.

nginx as load balancer:

  • 1 worker for HTTP load balancing.
  • 1 worker per core for HTTPS load balancing.

nginx as webservers:

This one is tricky.

Some applications/frameworks/middleware (e.g. php-fpm) are run outside of nginx. In that case, 1 nginx worker is enough because it's usually the external application that is doing the heavy processing and eating the resources.

Also, some applications/frameworks/middleware can only process one request at a time and it is backfiring to overload them.

Generally speaking, 1 worker is always a safe bet.

Otherwise, you may put one worker per core if you know what you're doing. I'd consider that route to be an optimization and advise proper benchmarking and testing.

worker_connections

The total amount of connections is worker_process * worker_connections. Half in load balancer mode.

Now we're reaching the toaster part. There are many seriously underrated system limits:

  • ulimits is 1k max open files per process on linux (1k soft, 4k hard on some distro)
  • systemd limits is about the same as ulimits.
  • nginx default is 512 connections per worker.
  • There might be more: SELinux, sysctl, supervisord (each distro+version is slightly different)

1k worker_connections

The safe default is to put 1k everywhere.

It's high enough to be more than most internal and unknown sites will ever encounter. It's low enough to not hit any other system limits.

10k worker_connections

It's very common to have thousands of clients, especially for a public website. I stopped counting the amount of websites I've seen went down because of the low defaults.

The minimum acceptable for production is 10k. Related system limits must be increased to allow it.

There is no such thing as a too-high limit (a limit simply has no effect if there are no users). However a too-low limit is a very real thing that results in rejected users and a dead site.

More than 10k

10k is nice and easy.

We could set an arbitrary 1000kk limits (it's only a limit after all) but that doesn't make much practical sense, we never get that traffic and couldn't take it anyway.

Let's stick to 10k as a reasonable setting. The services which are going for (and can really do) more will require special tuning and benchmarking.

Special Scenario: Advanced Usage

Sometimes, we know that the server doesn't have much resources and we expect spikes that we can't do much about. We'd rather refuse users than try. In that case, put a reasonable connection limit and configure nice error messages and handling.

Sometimes, the backend servers are working good and well but only up to some load, anything more and everything goes south quickly. We'd rather slow down than have the servers crash. In that case, configure queuing with strict limits, let nginx buffer all the heat while requests are being drained at a capped pace.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2016-07-05)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。