大网数据广告活动
服务器运维问答

Can't start CentOS 7 "network" service

· 52CE 我爱测

I Can't start CentOS 7 "network" service after disabling and removing "NetworkManager" service. When I check the network service status, it comes up with the following error: #systemctl status network.service network.service - LS…

问题原文

原帖链接 · Gazel · CC BY-SA 3.0

I Can't start CentOS 7 "network" service after disabling and removing "NetworkManager" service. When I check the network service status, it comes up with the following error:

#systemctl status network.service
network.service - LSB: Bring up/down networking
   Loaded: loaded (/etc/rc.d/init.d/network)
   Active: failed (Result: exit-code) since Fri 2015-01-16 22:30:46 GMT; 38s ago
  Process: 4857 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)

Jan 16 22:30:46 localhost.localdomain network[4857]: RTNETLINK answers: File exists
Jan 16 22:30:46 localhost.localdomain network[4857]: RTNETLINK answers: File exists
Jan 16 22:30:46 localhost.localdomain network[4857]: RTNETLINK answers: File exists
Jan 16 22:30:46 localhost.localdomain network[4857]: RTNETLINK answers: File exists
Jan 16 22:30:46 localhost.localdomain network[4857]: RTNETLINK answers: File exists
Jan 16 22:30:46 localhost.localdomain network[4857]: RTNETLINK answers: File exists
Jan 16 22:30:46 localhost.localdomain network[4857]: RTNETLINK answers: File exists
Jan 16 22:30:46 localhost.localdomain systemd[1]: network.service: control process exited, code=exited status=1
Jan 16 22:30:46 localhost.localdomain systemd[1]: Failed to start LSB: Bring up/down networking.
Jan 16 22:30:46 localhost.localdomain systemd[1]: Unit network.service entered failed state.

In earlier CenOS it didn't seem to give any problems when switching from the "NetworkManager" service to the network service. Any ideas as to what causes the problem and how to fix it?

Note: I used yum erase to remove network manage service.

Here is additional info as asked:

/etc/sysconfig/network-script/ifcfg-enp8s0
TYPE=Ethernet
BOOTPROTO=dhcp
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
NAME=enp8s0
UUID=453a07fe-1b07-4f29-bc32-f2168e50706a
ONBOOT=yes
HWADDR=XXXXXXXXXXX
MACADDR=XXXXXXXXXX
PEERDNS=yes
PEERROUTES=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes

/etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6

/etc/resolv.conf
; generated by /usr/sbin/dhclient-script
search customer.marples.midcity.lan
nameserver 10.241.128.1

已采纳解答

原帖链接 · Hans Then · CC BY-SA 3.0

In Centos7.0 disabling NetworkManager will leave a dhcp client running configured for NetworkManager. This causes the error message RTNETLINK answers: File exists when the network service is started.

The stale dhclient process has the additional "benefit" that when the lease expires your dhclient will choke, since it cannot reach NetWorkManager, thus removing your IP address.

If you grep for it, you will see that it points to a NetWorkManager configuration file.

[root@host ~]# ps -ef | grep dhc
root      1865   792  0 Apr28 ?        00:00:00 /sbin/dhclient -d -sf \
 /usr/libexec/nm-dhcp-helper -pf /var/run/dhclient-eno1.pid -lf\
 /var/lib/NetworkManager/dhclient-c96e56d3-a4c9-4a87-85ca-93dc0ca268f2-eno1.lease\
 -cf /var/lib/NetworkManager/dhclient-eno1.conf eno1

So what you can do is kill the dhclient and only then start your network service.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2015-01-16)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。