大网数据广告活动
服务器运维问答

Intermittently high ping times to router via Wi-Fi

· 52CE 我爱测

On my local network there are (among others) 5 machines (running Debian Jessie or Arch) wirelessly connected to a Netgear WNDR4000 router. Below is a graph of the ping times to the router from each of the machines, collected over…

问题原文

原帖链接 · jacg · CC BY-SA 3.0

On my local network there are (among others) 5 machines (running Debian Jessie or Arch) wirelessly connected to a Netgear WNDR4000 router. Below is a graph of the ping times to the router from each of the machines, collected over a period of around half an hour.

Observations:

  • When things are going well, the ping times are all below 3ms (under 1ms for two of the machines, including the problem machine purple)

  • At irregular intervals (of the order of 100s), three of these machines (red, green, purple) suffer degradation of ping times, while the other two appear unaffected.

  • The degradation periods coincide for all 3 machines.

  • The degradation for purple is two orders of magnitude more severe than for green and red, with ping times typically reaching over 20000ms for purple and 200ms for red and green.

  • If purple is physically moved nearer the router, the degradation completely disappears for purple while continuing as before for both red and green.

  • Red is 3m away and in direct line of sight from the base station; purple's usual location is about 10m away without direct line of sight.

This makes network access on purple intolarably slow (when it is in its normal location).

Can you suggest how to go about diagnosing and fixing the problem?

已采纳解答

原帖链接 · chicks · CC BY-SA 4.0

Clearly you have an interference problem. Interference can come from passive elements like aluminum wall studs or thick floors, but those are not likely to show the periodic pattern you see. So something electric or electronic is periodically emitting. Finding it may be expensive or tough, but you have a few options.

  1. Graph more. It would be nice to make sure that this isn't a bandwidth limitation of your own creation. Looking at the bandwidth consumed on your uplink and each of the clients might lead to a similar looking graph and the source of your problem.

  2. Upgrade firmware. Being on the latest firmware could get you past a bug in their code causing this. Plus it helps reduce the chances of your router being remotely compromised.

  3. Mitigate it. Get a wifi analyzer for your phone. Look at who is using what bands when purple is pokey particularly. You may find that switching from 7 to 1 or 14 takes care of your problem. The analyzer should show you how the channels spread out into each other, so if you are in a really busy area going for the in-betweens of 4 or 11 would let you reduce the congestion.

  4. Migrate. Can you move the WAP to a different location? Placing it in a place just a foot away can significantly effect propagation within a building.

  5. Ground it. Make sure all of your AV equipment (TV's, stereos, etc.) is properly grounded.

  6. Find it. You could use a spectrum analyzer and a directional antenna to find the emitter, but the spectrum analyzer is big bucks. If you know a ham (an amateur radio operator), they may have this gear laying around already; offer them food and don't be surprised if more than one shows up. The ham will also know the FCC regs inside and out which will be great if you actually find the source. Without bribing anyone you could try cutting things off and see if gets better, but it might not be your stuff causing the problem. When dealing with VCR's and TV's you may need to completely unplug them.

Good luck.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2014-12-06)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0 / CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。