大网数据广告活动
服务器运维问答

how to increase the size for /dev/mapper/centos-root?

· 52CE 我爱测

My current settings are as below, where the /dev/mapper/centos-root partition is almost full. Looks like this partition is on disk /dev/mapper/centos-root . but there is another disk /dev/vda , which still has enough free space A…

问题原文

原帖链接 · Hongwei Liu · CC BY-SA 4.0

My current settings are as below, where the /dev/mapper/centos-root partition is almost full.

Looks like this partition is on disk /dev/mapper/centos-root. but there is another disk /dev/vda , which still has enough free space

Are these two disks separate physical disks?

how to increase the /dev/mapper/centos-root partition?

[root@devbox ~]# df -h
Filesystem               Size  Used Avail Use% Mounted on
/dev/mapper/centos-root   18G   17G  1.4G  93% /
devtmpfs                 3.9G     0  3.9G   0% /dev
tmpfs                    3.9G   48M  3.8G   2% /dev/shm
tmpfs                    3.9G   74M  3.8G   2% /run
tmpfs                    3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/vda1                497M  297M  201M  60% /boot
tmpfs                    783M   48K  783M   1% /run/user/1001

[root@devbox ~]# fdisk -l

Disk /dev/vda: 85.9 GB, 85899345920 bytes, 167772160 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x0001ec6a

   Device Boot      Start         End      Blocks   Id  System
/dev/vda1   *        2048     1026047      512000   83  Linux
/dev/vda2         1026048    41943039    20458496   8e  Linux LVM
/dev/vda3        41943040    52428799     5242880   8e  Linux LVM

Disk /dev/mapper/centos-root: 18.8 GB, 18756927488 bytes, 36634624 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mapper/centos-swap: 2147 MB, 2147483648 bytes, 4194304 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

[root@devbox ~]# 

社区高分解答

原帖链接 · Jorge Valentini · CC BY-SA 4.0

The first thing is to check if you have free extents in your volume group, to do that, you will use:

vgdisplay

which will return details on the VG, the important line you must check is the one that states Free PE / Size. There you will see the size available to create or extend logical volumes. For instance in my case I have a server that says:

Free PE / Size           3834 / 14.98 GiB

Given that you have the required free space you should use:

lvextend /dev/mapper/centos-root -L +2G

In the latter case I am extending the logical volume adding 2GB. Note the +, if you give only the size, it will go to the specified size, I usually use this syntax because it is more transparent with the space you have available in the volume group.

After you successfully extended the volume (check with lvscan), you have to extend the file system, you can use:

resize2fs /dev/mapper/centos-root

As mentioned by @tinmarino and @y-melo in the comments. The command above will only work for ext2, ext3 and ext4. For xfs you should use xfs_growfs /dev/mapper/centos-root

Run df again to check that the available space has changed.

What if there's no space in the VG?

You have to first extend the volume group to be able to extend the logical volumes. For this matter you have to add a new disk. I am assuming that the CentOS box is a virtual machine because of the size of the disk, but of course this can be done on a physical server too, it is just that you have to physically add a disk.

Once you have the disk on the server, you have to create an LVM physical volume (PV), this can be created on a partition or even on the disk, I don't know the pros of doing it on the disk, but in my experience I have found it confusing as you won't be able to see a partition table, so I would recommend creating a partition first.

To create the PV over disk `/dev/vdb' partition 1 you do:

pvcreate /dev/vdb1

Once you have the PV, extend the VG (I don't know the name, I bet it is centos, check on your vgdisplay):

vgextend centos /dev/vdb1

TL;DR

For VG: vg0, LV:lv0 and new disk /dev/sdb. Extending 5GB

  1. Check available space on the VG: vgdisplay. If enough go to 4
  2. If you don't have space add a disk and create a PV: pvcreate /dev/sdb1
  3. Extend the VG: vgextend vg0 /dev/sdb1
  4. Extend the LV: lvextend /dev/vg0/lv0 -L +5G
  5. Check: lvscan
  6. Resize the file system: resize2fs /dev/vg0/lv0 (or xfs_growfs /dev/vg0/lv0)
  7. Check: df -h | grep lv0

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2018-11-01)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。