大网数据广告活动
服务器运维问答

How to force all traffic through VPN?

· 52CE 我爱测

I have a openVPN set up on the server and I am using openVPN connect for my client. I have some internal websites that I need to access and some of them don't work. I want to make sure that when the traffic is going through the V…

问题原文

原帖链接 · monkthemighty · CC BY-SA 3.0

I have a openVPN set up on the server and I am using openVPN connect for my client. I have some internal websites that I need to access and some of them don't work. I want to make sure that when the traffic is going through the VPN and not though the normal internet connection. The gateway ip for my network is 192.168.0.1 and the gateway for openVPN is 10.8.0.1. I have done trace route and it shows that the websites that don't work access 192.168.0.1 and not 10.8.0.1. How would I force all of the traffic through the vpn? I am running windows 7 as the client and ubuntu 10.04 for the server.

已采纳解答

原帖链接 · R. S. · CC BY-SA 3.0

From the OpenVPN HowTo Documentation

Implementation

Add the following directive to the server configuration file:

push "redirect-gateway def1"

If your VPN setup is over a wireless network, where all clients and the server are on the same wireless subnet, add the local flag:

push "redirect-gateway local def1"

Pushing the redirect-gateway option to clients will cause all IP network traffic originating on client machines to pass through the OpenVPN server. The server will need to be configured to deal with this traffic somehow, such as by NATing it to the internet, or routing it through the server site's HTTP proxy.

On Linux, you could use a command such as this to NAT the VPN client traffic to the internet:

iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE

This command assumes that the VPN subnet is 10.8.0.0/24 (taken from the server directive in the OpenVPN server configuration) and that the local ethernet interface is eth0.

When redirect-gateway is used, OpenVPN clients will route DNS queries through the VPN, and the VPN server will need handle them. This can be accomplished by pushing a DNS server address to connecting clients which will replace their normal DNS server settings during the time that the VPN is active. For example:

push "dhcp-option DNS 10.8.0.1" will configure Windows clients (or non-Windows clients with some extra server-side scripting) to use 10.8.0.1 as their DNS server. Any address which is reachable from clients may be used as the DNS server address.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2013-02-18)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。