问题原文
原帖链接 · wolfgang · CC BY-SA 3.0
This is my /etc/network/interfaces file contents
The only way this is taking effect is when the system reboots.
I'm trying to get it effected manually. My attempts below.
auto eth0
iface eth0 inet static
address 192.168.1.57
netmask 255.255.255.0
gateway 192.168.1.1
up ip addr add 192.168.0.57/24 dev eth0 label eth0:1
down ip addr del 192.168.0.57/24 dev eth0 label eth0:1
up ip route add 192.168.0.0/24 via 192.168.0.1 dev eth0:1 metric 20
down ip route del 192.168.0.0/24 via 192.168.0.1 dev eth0:1 metric 20
First tried to run sudo ifup eth0
and i receive
RTNETLINK answers: File exists
Failed to bring up eth0.
The /etc/network/interfaces only work when i reboot the system
Other than that i've tried
sudo /etc/init.d/networking restart
sudo service network-manager restart
sudo service networking restart
But none of them will bring up the changes in the interfaces file
My only option was sudo ifup eth0 and that gives the above error.
what is wrong?
已采纳解答
原帖链接 · dtoubelis · CC BY-SA 4.0
Edit your configuration file to remove the indentation before the iface stanza so that it looks like this,
auto eth0
iface eth0 inet static
address 192.168.1.57
netmask 255.255.255.0
gateway 192.168.1.1
up ip addr add 192.168.0.57/24 dev eth0 label eth0:1
down ip addr del 192.168.0.57/24 dev eth0 label eth0:1
up ip route add 192.168.0.0/24 via 192.168.0.1 dev eth0:1 metric 20
down ip route del 192.168.0.0/24 via 192.168.0.1 dev eth0:1 metric 20
The message you receive is just indication that the interface is already up, so you need to do ifdown before you do ifup. However, you need to be careful if you are connecting via ssh - you may lock yourself out. This is a way to do it:
sudo ifdown eth0 && sudo ifup eth0
Note, how these two commands are executed on the same line. And just a precaution, make sure you can access the server console or able to reboot the server if something goes wrong.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
