问题原文
原帖链接 · yakatz · CC BY-SA 4.0
We have a 12 TB RAID 6 array which is supposed to be set up as a single partition with an XFS file system. On creating the new file system, it says it has 78 GB in use, but there are no files on the drive.
[root@i00a ~]# df -h
Filesystem Size Used Avail Use% Mounted on
devtmpfs 32G 0 32G 0% /dev
tmpfs 32G 0 32G 0% /dev/shm
tmpfs 32G 11M 32G 1% /run
tmpfs 32G 0 32G 0% /sys/fs/cgroup
/dev/sdb3 154G 3.9G 150G 3% /
/dev/sdb2 1014M 153M 862M 16% /boot
/dev/sdb1 599M 6.7M 593M 2% /boot/efi
/dev/sdc1 187G 1.6G 185G 1% /var
tmpfs 6.3G 0 6.3G 0% /run/user/0
/dev/sda1 11T 78G 11T 1% /export/libvirt
Did I do something wrong? Is this by design?
It looks like the file system log only takes up about 2 GB, and I can't figure out what else could be using the space.
[root@i00a ~]# xfs_info /export/libvirt/
meta-data=/dev/sda1 isize=512 agcount=11, agsize=268435455 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1
data = bsize=4096 blocks=2929458688, imaxpct=5
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=521728, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
Partition information:
[root@irb00a ~]# parted /dev/sda1
GNU Parted 3.2
Using /dev/sda1
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
Model: Unknown (unknown)
Disk /dev/sda1: 12.0TB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Disk Flags:
Number Start End Size File system Flags
1 0.00B 12.0TB 12.0TB xfs
This is a Dell FX2 with four FC430 compute nodes and two FD332 storage nodes, running Red Hat Enterprise Linux 8 (Ootpa).
已采纳解答
原帖链接 · frostschutz · CC BY-SA 4.0
For XFS, the empty filesystem "Size Used" as shown by df -h seems to depend a lot on which metadata features you enable at mkfs.xfs time.
Testing with an empty 12TB file:
# truncate -s 12TB xfstest.img
Default settings (on my current ArchLinux system):
# mkfs.xfs xfstest.img
meta-data=xfstest.img isize=512 agcount=11, agsize=268435455 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=0
data = bsize=4096 blocks=2929687500, imaxpct=5
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=521728, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
# mount -o loop xfstest.img loop/
# df -h loop/
Filesystem Size Used Avail Use% Mounted on
/dev/loop0 11T 12G 11T 1% /dev/shm/loop
# umount loop/
Using reflink=1:
# mkfs.xfs -m reflink=1 -f xfstest.img
meta-data=xfstest.img isize=512 agcount=11, agsize=268435455 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1
data = bsize=4096 blocks=2929687500, imaxpct=5
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=521728, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
# mount -o loop xfstest.img loop/
# df -h loop/
Filesystem Size Used Avail Use% Mounted on
/dev/loop0 11T 78G 11T 1% /dev/shm/loop
Using crc=0, reflink=0: (for some reason, that also turns finobt=0, sparse=0)
# mkfs.xfs -m reflink=0 -m crc=0 -f xfstest.img
meta-data=xfstest.img isize=256 agcount=11, agsize=268435455 blks
= sectsz=512 attr=2, projid32bit=1
= crc=0 finobt=0, sparse=0, rmapbt=0
= reflink=0
data = bsize=4096 blocks=2929687500, imaxpct=5
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=521728, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
# mount -o loop xfstest.img loop/
# df -h loop/
Filesystem Size Used Avail Use% Mounted on
/dev/loop0 11T 33M 11T 1% /dev/shm/loop
In short:
# df -h loop/
Filesystem Size Used Avail Use% Mounted on
/dev/loop0 11T 78G 11T 1% /dev/shm/loop (reflink=1, crc=1)
/dev/loop0 11T 12G 11T 1% /dev/shm/loop (reflink=0, crc=1)
/dev/loop0 11T 33M 11T 1% /dev/shm/loop (reflink=0, crc=0)
So "Used" space on a fresh 12TB filesystem is 78G, 12G or as low as 33M depending on which metadata features you enable at mkfs time.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
