大网数据广告活动
服务器运维问答

linux: how to simulate hard disk latency? I want to increase iowait value without using a cpu power

· 52CE 我爱测

Is it possible to set an arbitrary delay for I/O operations? I would like to learn how do iowait and disk %util impact the performance. There are a lot of tools to stress the disk (bonnie++ etc.) but I'm looking for a way to intr…

问题原文

原帖链接 · user156233 · CC BY-SA 3.0

Is it possible to set an arbitrary delay for I/O operations?

I would like to learn how do iowait and disk %util impact the performance. There are a lot of tools to stress the disk (bonnie++ etc.) but I'm looking for a way to introduce a delay like the tc (traffic control) tool does for network. It is possible to disable some optimizations with hdparm tool, like set AAM to quiet or disable DMA and switch to PIO mode - which are only a indirect way to decrease I/O.

社区高分解答

原帖链接 · Steve Bonds · CC BY-SA 4.0

device-mapper "delay" devices

Look at the "delay" target for device-mapper devices. This is exactly why it exists.

Example

Here's an example of how to get that going:

Create a place to read/write from

[root@centos6 ~]# dd if=/dev/zero of=/tmp/100M-of-zeroes bs=1024k count=100
100+0 records in
100+0 records out
104857600 bytes (105 MB) copied, 0.141834 s, 739 MB/s

Make it into a block device

Dev-mapper only maps from one block device to another, not between files and block devices. That's the job of the loopback device.

[root@centos6 ~]# losetup --show --find /tmp/100M-of-zeroes
/dev/loop0

Get the device size in blocks

Since this is what dev-mapper will need here in a moment...

[root@centos6 ~]# blockdev --getsize /dev/loop0
204800

Set up a "slow" device

# echo "0 204800 delay /dev/loop0 0 200" | dmsetup create dm-slow
(about a 30 second pause here with no output)

The fields in the device mapper setup table in the "echo" command above are:

  1. starting sector of this section of the device mapper device (0)
  2. number of sectors of this section of the device mapper device (204800)
  3. the type of device mapper device for this section (delay)
  4. the first argument to "delay", which is the device to use for real reads/writes after the delay (/dev/loop/0)
  5. the second argument to "delay" which is the offset in the source device to use (0)
  6. the third argument to "delay" which is the ms of time to delay reads (or reads and writes if no further parameters are specified.) (200)

We only have one line since we're treating the entire device mapper device the same, but this lets you have different sectors with different backing devices, only have some of them slow, only having some of them give errors, etc.

See https://linux.die.net/man/8/dmsetup for more info, including the possibly-also-useful "flakey" mapper type. Authoritative documentation on device-mapper's delay feature is at https://www.kernel.org/doc/Documentation/device-mapper/delay.txt

Is it slow?

[root@centos6 ~]# dd if=/dev/mapper/dm-slow of=/dev/null count=25000
25000+0 records in
25000+0 records out
12800000 bytes (13 MB) copied, 10.2028 s, 1.3 MB/s

Yeah, that's pretty slow, especially compared to the original:

[root@centos6 ~]# dd if=/dev/loop0 of=/dev/null count=25000
25000+0 records in
25000+0 records out
12800000 bytes (13 MB) copied, 0.0361308 s, 354 MB/s

So the mapped device is definitely introducing a delay.

Combine the above

I intentionally broke things apart so the process was easy to follow. However, you could easily combine steps above into fewer commands.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2013-07-15)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0 / CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。