大网数据广告活动
服务器运维问答

How to determine cause of system crash?

· 52CE 我爱测

My server crashes about once a week and does not leave any kind of clue as to what's causing it. I have checked /var/log/messages and it just stops recording at some point and starts at the computer post information when I perfor…

问题原文

原帖链接 · Nahydrin · CC BY-SA 4.0

My server crashes about once a week and does not leave any kind of clue as to what's causing it. I have checked /var/log/messages and it just stops recording at some point and starts at the computer post information when I perform a hard reboot.

Is there something I can check or software I can install that can determine the cause?

I'm running CentOS 7.

Here is the only error/problem in my /var/log/dmesg: https://paste.netcoding.net/cosisiloji.log

[    3.606936] md: Waiting for all devices to be available before autodetect
[    3.606984] md: If you don't use raid, use raid=noautodetect
[    3.607085] md: Autodetecting RAID arrays.
[    3.608309] md: Scanned 6 and added 6 devices.
[    3.608362] md: autorun ...
[    3.608412] md: considering sdc2 ...
[    3.608464] md:  adding sdc2 ...
[    3.608516] md: sdc1 has different UUID to sdc2
[    3.608570] md:  adding sdb2 ...
[    3.608620] md: sdb1 has different UUID to sdc2
[    3.608674] md:  adding sda2 ...
[    3.608726] md: sda1 has different UUID to sdc2
[    3.608944] md: created md2
[    3.608997] md: bind<sda2>
[    3.609058] md: bind<sdb2>
[    3.609116] md: bind<sdc2>
[    3.609175] md: running: <sdc2><sdb2><sda2>
[    3.609548] md/raid1:md2: active with 3 out of 3 mirrors
[    3.609623] md2: detected capacity change from 0 to 98520989696
[    3.609685] md: considering sdc1 ...
[    3.609737] md:  adding sdc1 ...
[    3.609789] md:  adding sdb1 ...
[    3.609841] md:  adding sda1 ...
[    3.610005] md: created md1
[    3.610055] md: bind<sda1>
[    3.610117] md: bind<sdb1>
[    3.610175] md: bind<sdc1>
[    3.610233] md: running: <sdc1><sdb1><sda1>
[    3.610714] md/raid1:md1: not clean -- starting background reconstruction
[    3.610773] md/raid1:md1: active with 3 out of 3 mirrors
[    3.610854] md1: detected capacity change from 0 to 20970405888
[    3.610917] md: ... autorun DONE.
[    3.610999] md: resync of RAID array md1
[    3.611054] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
[    3.611119] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[    3.611180] md: using 128k window, over a total of 20478912k.
[    3.611244]  md1: unknown partition table
[    3.624786] EXT3-fs (md1): error: couldn't mount because of unsupported optional features (240)
[    3.627095] EXT2-fs (md1): error: couldn't mount because of unsupported optional features (244)
[    3.630284] EXT4-fs (md1): INFO: recovery required on readonly filesystem
[    3.630341] EXT4-fs (md1): write access will be enabled during recovery
[    3.819411] EXT4-fs (md1): orphan cleanup on readonly fs
[    3.836922] EXT4-fs (md1): 24 orphan inodes deleted
[    3.836975] EXT4-fs (md1): recovery complete
[    3.840557] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)

社区高分解答

原帖链接 · shodanshok · CC BY-SA 4.0

If you have crashkernel/kdump installed and enabled, you should be able to examine the crashed kernel with relative ease using the crash utility. For example, presuming that your crashed kernel dumps are saved under /var/crash:

crash /var/crash/2009-07-17-10\:36/vmcore \
      /usr/lib/debug/lib/modules/`uname -r`/vmlinux`

Look at Fedora's kdump debugging guide and Red Hat's crashdump guide (PDF) for added details.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2017-04-17)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。