问题原文
原帖链接 · blerontin · CC BY-SA 3.0
I have a DHCP server (Linux, IPCop, dnsmasq) running on my default gateway server 192.168.0.1. I have a VPN endpoint on another server in the network (192.168.0.4). Is it possible to configure the DHCP server so it sends not only the default gateway but also routing information for the VPN (192.168.1.*) to DHCP clients when they request an IP address? The DHCP clients run Windows and Linux.
I tried to find something in the official documentation (http://www.ipcop.org/2.0.0/en/admin/html/custom-dnsmasq-local.html) but failed. The existence of RFC3442 indicates that it might be possible somehow.
已采纳解答
原帖链接 · blerontin · CC BY-SA 3.0
This can be done by adding the following lines to dhcpd.conf:
option rfc3442-classless-static-routes code 121 = array of integer 8;
option rfc3442-classless-static-routes 24, 192, 168, 1, 192, 168, 0, 4;
option ms-classless-static-routes code 249 = array of integer 8;
option ms-classless-static-routes 24, 192, 168, 1, 192, 168, 0, 4;
This distributes a route entry for network 192.168.1.0/24 using the gateway 192.168.0.4.
The meaning of the bytes is (in brackets the value from the example above):
WW, D1, D2, D3, R1, R2, R3, R4
WW = destination network mask width (24)
D1..D3 = destination network address (192.168.1.*)
R1..R4 = router address (192.168.0.4)
Note: The number of D1..DN bytes varies depending on the network mask. See RFC3442 for details.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
