大网数据广告活动
服务器运维问答

TCP source port sharing

· 52CE 我爱测

My understanding of TCP connection is that a source PORT remains exclusive to one connection, no matter the destination is, so the number of connections from local port 12345 for example can never exceed 1. I recently read that a…

问题原文

原帖链接 · doc_id · CC BY-SA 4.0

My understanding of TCP connection is that a source PORT remains exclusive to one connection, no matter the destination is, so the number of connections from local port 12345 for example can never exceed 1.

I recently read that a TCP connection is identified by <src IP, src PORT, dst IP, dst PORT>

TCP allows source port sharing across multiple processes, but each process requires a free port to bind to for its connection

so I went to validate that "port sharing across processes": this must mean that the same source port can be used to connect to different destinations.

However, when experimenting this, I tried these two commands:

nc -v -p 12345 google.com 80

which works well (-v for verbose, and -p to specify the source port as 12345, for my learning purpose)

Now, simultaneously running this command on a different shell

nc -v -p 12345 github.com 80

fails with this error message:

nc: connectx to github.com port 80 (tcp) failed: Address already in use

the reason I specified the same source port with -p is to validate that a source port can be shared. There's no need for this practically, in real-world scenario I would not even worry about source port. According to this, is it true that a source port will be only used once?

已采纳解答

原帖链接 · nneonneo · CC BY-SA 4.0

There is no reason why two processes cannot use the same source port, as long as they do not both connect to the same destination (host, port). On many UNIX systems, set the SO_REUSEPORT option to enable processes to share a port number; on Windows, set SO_REUSEADDR. For example, with socat:

  • process 1: socat stdio tcp:google.com:80,bind=:12345,reuseport
  • process 2: socat stdio tcp:bing.com:80,bind=:12345,reuseport

These two processes can run simultaneously, and will both have source port 12345 (as you can confirm with netstat).

Note, however, that you will almost certainly run into issues if the sockets are not closed cleanly on both ends, as unclosed TCP sockets will enter a TIME_WAIT state which will cause the four-tuple (srcaddr, srcport, dstaddr, dstport) to be tied up until the wait period expires. Therefore, when using a single source port for multiple connections, you cannot reconnect to the exact same server & port unless the previous connection has fully shut down or the TIME_WAIT period has expired.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2024-06-12)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。