大网数据广告活动
服务器运维问答

How to configure StrongSwan IKEv2 VPN with PSK (pre-shared key)?

· 52CE 我爱测

I'm looking for a configuration instructions for IKEv2 VPN that uses pre-shared keys instead of certs (those are different methods for tunnel encryption I'd assume?). I've followed this wonderful tutorial to get IKEv2 VPN working…

问题原文

原帖链接 · Dannie P · CC BY-SA 4.0

I'm looking for a configuration instructions for IKEv2 VPN that uses pre-shared keys instead of certs (those are different methods for tunnel encryption I'd assume?).

I've followed this wonderful tutorial to get IKEv2 VPN working (with certificate) and it works.

My question is what needs to be changed so that it would use PSK instead? I'd assume changes in /etc/ipsec.secrets and /etc/ipsec.conf are to be made.

My current ipsec.conf looks like this:

config setup
    charondebug="ike 1, knl 1, cfg 0"
    uniqueids=no

conn ikev2-vpn
    auto=add
    compress=no
    type=tunnel
    keyexchange=ikev2
    fragmentation=yes
    forceencaps=yes
    ike=aes256-sha1-modp1024,3des-sha1-modp1024!
    esp=aes256-sha1,3des-sha1!
    dpdaction=clear
    dpddelay=300s
    rekey=no
    left=%any
    leftid=@server_name_or_ip
    leftcert=/etc/ipsec.d/certs/vpn-server-cert.pem
    leftsendcert=always
    leftsubnet=0.0.0.0/0
    right=%any
    rightid=%any
    rightauth=eap-mschapv2
    rightdns=8.8.8.8,8.8.4.4
    rightsourceip=10.10.10.0/24
    rightsendcert=never
    eap_identity=%identity

UPD: Based on my tinkering and @ChandanK answer, I've made two scripts to deploy a StrongSwan VPN server on a fresh Ubuntu 16.04 install here: https://github.com/truemetal/ikev2_vpn

已采纳解答

原帖链接 · ChandanK · CC BY-SA 3.0

Assuming that you want to setup your right side with psk. This is fairly easy.

1. remove eap_identity and rightsendcert fields. 2. set rightauth=secret

Now edit /etc/ipsec.secrets file:

1. remove "your_username %any% : EAP "your_password"" line. 2. add ": PSK <your_password>"

Then reread the secrets and restart the service.

$sudo ipsec rereadsecrets $sudo ipsec reload $sudo ipsec restart

All set. Follow "Connecting from iOS" and create a new ikev2 vpn connection. In authentication settings select none and put the shared secret key. Hopefully you connect.

Edit:

Based on the comments, configuration changes required to switch to pre-shared key authentication:

config setup
    charondebug="ike 1, knl 1, cfg 0"
    uniqueids=no

conn ikev2-vpn
    auto=add
    compress=no
    type=tunnel
    keyexchange=ikev2
    fragmentation=yes
    forceencaps=yes
    ike=aes256-sha1-modp1024,3des-sha1-modp1024!
    esp=aes256-sha1,3des-sha1!
    dpdaction=clear
    dpddelay=300s
    rekey=no
    left=%any
    leftid=@server_name_or_ip
    leftsubnet=0.0.0.0/0
    right=%any
    rightid=%any
    rightdns=8.8.8.8,8.8.4.4
    rightsourceip=10.10.10.0/24
    authby=secret

Remove the following line from ipsec.secrets:

server_name_or_ip : RSA "/etc/ipsec.d/private/vpn-server-key.pem

Then reread the secrets and restart the service.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2017-08-08)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0 / CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。