问题原文
原帖链接 · Moshe Katz · CC BY-SA 4.0
I have installed Ubuntu 18.04 on a Dell PowerEdge R720xd using ZFS. There are two 1TB boot drives in a ZFS mirror configuration. I followed the instructions in the ZFS on Linux Wiki.
(Note: My system is using an LSI LSI00244 (9201-16i) Host-bus Adapter (HBA) instead of the onboard RAID card, since ZFS and this RAID card don't get along.)
When booting Ubuntu, it takes about ten seconds for the drives to be enumerated by the system (there are 14 drives - two for the OS and 12 for data storage that will be set up in other zpools later). However, the boot process tries to import the boot pool before the drives have been enumerated.
A BusyBox error message flashes past on the screen, and it basically says:
The pool failed to import.
Manually import the pool in this BusyBox shell and then type
exitto continue the boot process.
If I wait a few seconds after that message, I see that the 14 drives get listed.
I type zpool import rpool at the BusyBox prompt, which works (confirmed with zpool list) and then exit to continue the boot process. (This then leads to my next problem, a Kernel crash, but that's a separate question.)
I tried adding rootdelay=15 to the boot options, but that doesn't seem to work since it seems to want to run that delay after the ZFS pool import.
How can I get the boot process to wait for the devices to show up before it tries to import the pool?
已采纳解答
原帖链接 · Moshe Katz · CC BY-SA 4.0
I finally found this in /etc/default/zfs:
# Wait for this many seconds in the initrd mountroot?
# This delays startup and should be '0' on most systems. This might help on
# systems which have their ZFS root on a USB disk that takes just a little
# longer to be available
# Only applicable for Debian GNU/Linux {dkms,initramfs}.
ZFS_INITRD_POST_MODPROBE_SLEEP='0'
Here's how to set it.
- Boot from a Ubuntu Live CD (or any other recovery media)
- Import the pool to
/mntusingzpool import rpool -R /mnt - Bind the necessary filesyststems
mount --rbind /dev /mnt/dev; mount --rbind /proc /mnt/proc; mount --rbind /sys /mnt/sys - Chroot into
/mnt:chroot /mnt /bin/bash --login - Edit
/etc/default/zfsto change the value above from0to15 - Run
update-initramfsandupdate-grub - Exit the Chroot environment and reboot
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
