大网数据广告活动
服务器运维问答

RAID with different drive types possible?

· 52CE 我爱测

In a high density storage server, which is in a RAID array, do all drives have to be of same type. Such as a mix of drives SSD, SATA? In a RAID array most controller require only that all drives be of the same capacity but what a…

问题原文

原帖链接 · Slartibartfast · CC BY-SA 4.0

In a high density storage server, which is in a RAID array, do all drives have to be of same type. Such as a mix of drives SSD, SATA? In a RAID array most controller require only that all drives be of the same capacity but what about drive type?

已采纳解答

原帖链接 · shodanshok · CC BY-SA 4.0

Hardware RAID controllers from LSI, DELL, HP etc. does not allow mixing disks with different interfaces (eg: SATA and SAS) in a single array. What you can do is to create two different arrays, each for a specific interface protocol - a SATA array and a SAS one, for example.

Software RAID does not share this limitation - basically any block device (even a loopback device) can be part of any arrays. However, mixing different disk technologies is generally discouraged to avoid an unbalanced array (performance wise). For cache drives, as ZFS L2ARC or LVM dm-cache, things are different - here you actually want a faster drive. So, for example, using an NVMe cache in front of a SATA array is perfectly fine.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2023-04-23)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。