问题原文
原帖链接 · Ineu · CC BY-SA 3.0
I have problem adding direct routes through systemd-networkd. What I'm trying to achieve is similar to:
ip a a 192.168.0.2/32 dev enp0s3
ip r a 192.168.0.1/32 dev enp0s3
ip r a default via 192.168.0.1
This is weird setup, I know, but I can't use usual ip a a 192.168.0.2/24 to reach gateway. For some reason whole /24 subnet is reachable through the gateway in this subnet. So this default route is not only for catch-all routes, but to reach subnet as well.
So, I've created /etc/systemd/network/enp0s3.network:
[Match]
Name=enp0s3
[Address]
Address=192.168.0.2/32
[Route]
Destination=192.168.0.1/32
[Route]
Gateway=192.168.0.1
The problem with this setup is that second Route block is never executed. I did some debugging and here is the difference between what ip and systemd-networkd does for the first Route block.
# ip
192.168.0.1 dev enp0s3 scope link
# networkd
192.168.0.1 dev enp0s3 proto static
So systemd-networkd doesn't add scope link to the route. That's why an attempt to add default route via 192.168.0.1 fails with Network is unreachable error. This is fixable by
ip r c 192.168.0.1/32 dev enp0s3 # automatically adds `scope link`
ip r a default via 192.168.0.1 # added successfully
So my question is: should such behaviour be considered a systemd-networkd bug or am I using it wrong? I couldn't find any documentation regarding direct routes in networkd. For now I've disabled systemd-networkd and created service to run ip commands directly. But I'd like to use standard approach as this is CoreOS I'm trying to configure.
已采纳解答
原帖链接 · Ineu · CC BY-SA 3.0
So the solution here is a bit tricky: you need to add gateway as a pointopoint parameter with /32 mask. This works:
[Match]
Name=enp0s3
[Address]
Address=192.168.0.2
Peer=192.168.0.1/32
[Network]
Gateway=192.168.0.1
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
