问题原文
原帖链接 · Tackled Archon · CC BY-SA 3.0
We received two servers with hyper-V 2012R2 free for our project this week, and we need to create an SMB failover. I'm not familiar with multiple network card setups, as we had our previous servers with a single NIC.
How can I configure properly the settings in PowerShell to transfer the data over multiple network connections?
已采纳解答
原帖链接 · batistuta09 · CC BY-SA 3.0
You need to add MPIO feature and configure multipathing. Here’s the detailed guide about SMB, find the MPIO configuration: https://www.starwindsoftware.com/blog/part-2-smb-3-0-file-server-on-free-microsoft-hyper-v-server-2012-r2-clustered.
Here’s an info about MPIO as well http://www.itprocentral.com/mpio-on-hyper-v-server/.
Also, make sure you don’t use LACP with the iSCSI because of possible latency issues.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
