大网数据广告活动
服务器运维问答

How to communicate with four separate LANs

· 52CE 我爱测

I have 4 physically distinct networks. Let's call them A, B, C and D. Usually, these should be isolated. However, there are various machines that require access to any two of them. These are secured with the necessary firewalls. …

问题原文

原帖链接 · ScottishTapWater · CC BY-SA 3.0

I have 4 physically distinct networks. Let's call them A, B, C and D.

Usually, these should be isolated. However, there are various machines that require access to any two of them. These are secured with the necessary firewalls.

Now a requirement has come in that necessitates one machine having access to all 4 networks.

My initial reaction was to just put 4 NICs in the machine and be done with it, but this seems rather insecure. The recommendation from a previous installation is to use a switch to create a common network. Again, this doesn't seem secure. My question is this:

How would I implemente a network similar to the above diagram, where the router was a server and the 3 VLANS are my other networks. Such that:

  • The server can access any machine on any other network according to that particular network's firewalls.
  • Machines on the networks can access the server according to the applicable firewalls.
  • There is no way for machines on the different networks to communicate with another network.

I'm not looking for a blow-by-blow, just for someone to point me in the right direction.

已采纳解答

原帖链接 · Esa Jokinen · CC BY-SA 3.0

Why don't you simply create a new subnet for them (or for each, if necessary)? Work on layer 3 and forget trying to solve this on layer 2. Enable routing between the networks and limit it on the firewall-router to allow only those network-host pairs and protocol that are required.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2018-03-23)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。