问题原文
原帖链接 · Nikk · CC BY-SA 4.0
After changing the port.
And restarting the SSH service, it failed on me.
I got the following info when I ran systemctl status sshd.service:
sshd.service: main process exited, code=exited, status=255/n/a
Unit sshd.service entered failed state.
sshd.service failed.
Any suggestions on how do I fix this (newb here)?
已采纳解答
原帖链接 · Jakuje · CC BY-SA 3.0
To allow sshd running on different port than default 22, you need to adjust SELinux policy, otherwise it will be blocked from binding the port. The procedure is explained just few lines above the line you were changing in sshd_config:
# If you want to change the port on a SELinux system, you have to tell
# SELinux about this change.
# semanage port -a -t ssh_port_t -p tcp #PORTNUMBER
Therefore in your case, just run from root shell (or with sudo):
semanage port -a -t ssh_port_t -p tcp 977
and then try to restart the service again. If it will not solve your problems, have a look into the logs and update the question.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
