问题原文
原帖链接 · niemion · CC BY-SA 3.0
When I test my own '10 Gigabit' instances (c3.8xlarge) with iperf I won't see transfer rates exceeding 1.73 Gbps. This is at least four times worse than what a blogger at scalablelogic reports where tests show results of 7 Gbps and 9.5 Gbps.
I'm testing between two c3.8xlarge instances located in the same zone and region, so these should be optimal benchmarking conditions. The one c3.8xlarge acts as iperf server and the other as an iperf client. Both instances are launched with Amazon Linux AMI 2013.09.2 - ami-5256b825 (64-bit).
Why am I seeing such poor results?
What should I look at if I want to improve throughput?
已采纳解答
原帖链接 · niemion · CC BY-SA 3.0
AWS Support admit that 10 GbE speeds can only be achieved between instances on the private subnet network. It requires that the private IP is used as opposed to the public IP which in my case always maxes out at 1.73 Gbps. That might change depending on zone and region. If you see different results please post them here.
This means that when it comes to external throughput, the c3.8xlarge (or similar 10 GbE instances) offer terrible value when compared to smaller instances with "High" network capabilities. A c1.medium instance comes at 1/16 the price of a c3.8xlarge, but it will allow for over half the througput (~0,95 Gbps) of a c3.8xlarge 10 GbE instance (~1,7 Gbps).
See this thread on the Wowza forums for AWS Support's answers.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
