问题原文
原帖链接 · Kuruwan · CC BY-SA 4.0
On a devices located between my local network and a router, (all the traffic pass through) I need to read the common name from Hello Server Certificate packet.
So I'm trying to figure out how to get the proper filter with tcpdump.
I found help from this paper : http://www.wains.be/pub/networking/tcpdump_advanced_filters.txt
It explain how to use advance filter on IP and TCP fields.
I tried this kind of filter :
$ tcpdump -i any \
'tcp and (((ip[2:2] - ((ip[0]&0xf)<<2)) - ((tcp[12]&0xf0)>>2)) != 0)' \
-A -s 0 -v | grep 'Host\|id-at-commonName='
As explained in the paper, "We are matching any packet that contains data."
It works for the Host field as for many other data, but I can't match the field id-at-commonName= which is in SSL field (so in the TCP Data field ?).
To be sure I captured a pcap file with the exact same filter (without the grep) and when I open it with Wireshark, I can get every Certificate Common name. I must use a tcpdump filter because I need to get the data "on the fly".
Can someone explain why I can't see this data through tcpdump?
社区高分解答
原帖链接 · Nathan Chan · CC BY-SA 3.0
If you just want to get the SSL Handshake Hello packet to see the contained SNI, the following filter seems to work for both TLS1.0 and TLS1.2 :
tcpdump -i any -s 1500 (tcp[((tcp[12:1] & 0xf0) >> 2)+5:1] = 0x01) and (tcp[((tcp[12:1] & 0xf0) >> 2):1] = 0x16)
where 0x16 = Handshake (22) at the first byte field of the data
and 0x01 = Client Hello (1) at the 6th byte field of the data
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
