问题原文
原帖链接 · TSG · CC BY-SA 4.0
I have an avago raid controller managing an array of 4 disks + 1 hot spare.
----------------------------------------------------------------------------------
EID:Slt DID State DG Size Intf Med SED PI SeSz Model Sp Type
----------------------------------------------------------------------------------
252:0 3 Onln 0 5.457 TB SATA HDD N N 512B WDC WD6002FRYZ-01WD5B1 U -
252:1 5 Onln 0 5.457 TB SATA HDD N N 512B WDC WD6002FRYZ-01WD5B1 U -
252:2 6 Onln 0 5.457 TB SATA HDD N N 512B WDC WD6002FRYZ-01WD5B1 U -
252:3 7 Onln 0 5.457 TB SATA HDD N N 512B WDC WD6002FRYZ-01WD5B1 U -
252:4 4 GHS - 7.276 TB SATA HDD N N 512B WDC WD8004FRYZ-01VAEB0 U -
----------------------------------------------------------------------------------
All is working well, but I notice that the storcli output shows the GHS disk as spun up. Why keep the GHS spun up - won't that just wear out a disk which is otherwise idle? Is it possible to spin down this drive until it is needed?
已采纳解答
原帖链接 · shodanshok · CC BY-SA 4.0
When a disk is spun-down for extended period of time, the bearings can dry to the point the HDD can no longer spin-up correctly. For this reason, a true hot spare should generally be kept spun-up.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
