大网数据广告活动
服务器运维问答

linux initcwnd and initrwnd via /etc/sysctl.conf

· 52CE 我爱测

Folks, As we know, the 3.x kernels have higher TCP default connection values, such as initcwnd and initrwnd. For 2.x friends, is there a way to set these in /etc/sysctl.conf instead of the ip route way? Instead of the following: …

问题原文

原帖链接 · CMag · CC BY-SA 3.0

Folks, As we know, the 3.x kernels have higher TCP default connection values, such as initcwnd and initrwnd. For 2.x friends, is there a way to set these in /etc/sysctl.conf instead of the ip route way?

Instead of the following:

sudo ip route change default via 192.168.1.1 dev eth0  proto static initcwnd 10

Is there a way to set the same in /etc/sysctl.conf?

Thanks

社区高分解答

原帖链接 · Malvineous · CC BY-SA 4.0

Not quite answering the question but in December 2017 support for changing these values was added to systemd-networkd so you can now put this in /etc/systemd/network/*.network to make it persistent:

[Route]
Gateway=_dhcp4
InitialCongestionWindow=10          # initcwnd
InitialAdvertisedReceiveWindow=10   # initrwnd

The Gateway=_dhcp4 line is needed if you want the [Route] section to apply to the gateway supplied via DHCP. Otherwise add the Initial* lines to your existing [Route] section where you manually specify your gateway address.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2013-10-16)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0 / CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。