大网数据广告活动
服务器运维问答

Port forwarding test possible within LAN? Mikrotik Router

· 52CE 我爱测

I set up port forwarding on a Mikrotik router, but the router OS (v6.39.2) seems a lot more complicated than the standard off-the-shelf router interface I am used to. I followed the instructions from here and these are the settin…

问题原文

原帖链接 · evsc · CC BY-SA 4.0

I set up port forwarding on a Mikrotik router, but the router OS (v6.39.2) seems a lot more complicated than the standard off-the-shelf router interface I am used to. I followed the instructions from here and these are the settings I entered in IP/Firewall/NAT:

- Chain: dstnat
 - Protocol: 6 (tcp)
 - Dst Port: 8000
 - In. Interface: all Ethernet (for testing purposes) 
 - Action: dst-nat
 - Log: yes (for testing purposes)
 - To Addresses: 192.168.1.33
 - To Ports: 8000

As it doesn't look that the 8000 port hasn't officially been opened yet in the outer network (waiting for someone to do that, meanwhile I checked if it was open with yougetsignal.com) I would like to at least test if my port-forward rule works within the local network IF THAT IS POSSIBLE.

When I try to access 192.168.1.1:8000 in a web browser, i see some activity in the rate graph in the NAT-rule setting. But the web browser still only gives me a "This site can’t be reached" response.

My hope is that it would forward me to 192.168.1.33:8000. Should this be possible? Or did i do something wrong?

社区高分解答

原帖链接 · Anton Danilov · CC BY-SA 4.0

Mikrotik RouterOS based on the Linux kernel and has inherited most of the conceptions of networking.

So, I'll describe the setup of the port forwarding in the Mikrotik routers. And I'll try to describe your issue.

If you want to understand it more deeply, you can read the iptables tutorial. It's pretty cool documentation with detailed explanations.

  1. Let's draw the network topology:

  1. Create the port forwarding rule. Better way specify the original destination address instead the interface. This allows use single rule to rewrite destination address for both for packets from outside and for packets from LAN. So, your rule is correct:
- Chain: dstnat
- Protocol: 6 (tcp)
- Dst Address: <wan-ip>
- Dst Port: 8000
- In. Interface: all Ethernet (for testing purposes)
- Action: dst-nat
- Log: yes (for testing purposes)
- To Addresses: 192.168.1.33
- To Ports: 8000
  1. When the packets arrive from outside (wan interface), the case is a trivial. But, when the packets, which should be port forwarded, arrive from LAN, something interesting happens.

    • Let's guess the user of the LAN host tries to browse the http://<wan-ip>:8000 web page. The TCP packet in form 192.168.1.Z:Y -> <wan-ip>:8000 TCP [SYN] is originated on the LAN host and is sent to the default gateway (Mikrotik router).
    • The mikrotik router receives this packet.
    • Then rewrites the destination address due your dst-nat rule. After this action the packet will looks like 192.168.1.Z:Y -> 192.168.1.33:8000 TCP [SYN]
    • The router looks up the further path and sends the packet into the LAN to the 192.168.1.33 host.
    • The 192.168.1.33 host receives the TCP packet in form of TCP SYN 192.168.1.Z:Y -> 192.168.1.33:8000, create the reply in form of 192.168.1.33:8000 -> 192.168.1.Z:Y TCP [SYN-ACK] and sends it to LAN host directly.
    • The LAN host receives the packet 192.168.1.33:8000 -> 192.168.1.Z:Y TCP [SYN-ACK], but it isn't what the host expects! And this packet will be dropped.
    • As can you see, to make all work, the 192.168.1.33 host should send replies to the mikrotik router, not to the LAN host directly. To do it, you can add additional src-nat rule to the Mikrotik.
- Chain: srcnat
- Protocol: 6 (tcp)
- Dst Address: 192.168.1.33
- Dst Port: 8000
- Src Address: 192.168.1.0/24
- Action: src-nat
- Log: yes (for testing purposes)
- To Addresses: 192.168.1.1

It makes the Mikrotik rewrites the source address in the port forwarded packets, originated in the LAN. After it the 192.168.1.33 host will see these packets as 192.168.1.1:X -> 192.168.1.33:8000 TCP [SYN], and send the reply to the Mikrotik. The mikrotik will do the reverse addresse translation and all will work.

  1. Another thing, what you should configure, is the firewall filter rules. In simple case the default rules are enough. If you prefer configure such thing youself, then you need a couple of rules in the filter/FORWARD chain:
- Chain: filter/FORWARD
- Protocol: 6 (tcp)
- Connection state: new
- Dst address: 192.168.1.33
- Dst port: 8000
- Action: accept

- Chain: filter/FORWARD
- Connection state: established,related
- Action: accept

Obviously, there are enough ways to improve, but the main concept is should be clear now.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2019-06-06)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。