大网数据广告活动
服务器运维问答

Fedora's firewall-cmd shows more available services than configured

· 52CE 我爱测

So yeah, configuring Fedora 20's firewall-cmd. Tried to limit inbound traffic to only http, https, and ssh. However, the machine still responds to pings, and the --get-service command shows a laundry list of things I do not use. …

问题原文

原帖链接 · NickBorgers · CC BY-SA 3.0

So yeah, configuring Fedora 20's firewall-cmd. Tried to limit inbound traffic to only http, https, and ssh. However, the machine still responds to pings, and the --get-service command shows a laundry list of things I do not use.

Why the disconnect?

Is the --get-service command accurate, or is the --list-services command accurate?

If the latter, why does ping get through?

[root@build-node httpd]# firewall-cmd --get-service
amanda-client bacula bacula-client dhcp dhcpv6 dhcpv6-client dns ftp high-availability http https imaps ipp ipp-client ipsec kerberos kpasswd ldap ldaps libvirt libvirt-tls mdns mountd ms-wbt mysql nfs ntp openvpn pmcd pmproxy pmwebapi pmwebapis pop3s postgresql proxy-dhcp radius rpc-bind samba samba-client smtp ssh telnet tftp tftp-client transmission-client vnc-server wbem-https
[root@build-node httpd]# firewall-cmd --get-active-zone
public
  interfaces: eth0 eth1 eth2
[root@build-node httpd]# firewall-cmd --zone=public --list-services
http https ssh

Additionally, excerpts from iptables -L -n.

Chain INPUT (policy ACCEPT)
target     prot opt source               destination
ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0            ctstate RELATED,ESTABLISHED
ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
INPUT_direct  all  --  0.0.0.0/0            0.0.0.0/0
INPUT_ZONES_SOURCE  all  --  0.0.0.0/0            0.0.0.0/0
INPUT_ZONES  all  --  0.0.0.0/0            0.0.0.0/0
ACCEPT     icmp --  0.0.0.0/0            0.0.0.0/0
REJECT     all  --  0.0.0.0/0            0.0.0.0/0            reject-with icmp-host-prohibited

Chain INPUT_ZONES (1 references)
target     prot opt source               destination
IN_public  all  --  0.0.0.0/0            0.0.0.0/0           [goto]
IN_public  all  --  0.0.0.0/0            0.0.0.0/0           [goto]
IN_public  all  --  0.0.0.0/0            0.0.0.0/0           [goto]
IN_public  all  --  0.0.0.0/0            0.0.0.0/0           [goto]

Chain IN_public_allow (1 references)
target     prot opt source               destination
ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0            tcp dpt:80 ctstate NEW
ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0            tcp dpt:443 ctstate NEW
ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0            tcp dpt:22 ctstate NEW

已采纳解答

原帖链接 · Michael Hampton · CC BY-SA 4.0

--get-services shows all services that firewalld is aware of, not those that you have opened ports for.

--list-services shows those that you have opened ports for.

You can see in the iptables listing that only ports 22, 80 and 443 are open, which is what you said you wanted.

Finally, about pings: All ICMP is allowed by default with firewalld (as it's usually a bad idea to block it unless you really know what you're doing). If you truly want to "block pings" then you have to do so explicitly. You can use --get-icmptypes to see the list of ICMP types that firewalld knows about, and --add-icmp-block to block one of them. Be sure you're on the console of the machine in case you lock yourself out.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2014-06-01)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0 / CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。