大网数据广告活动
服务器运维问答

Recover from Cisco ASA 5508-X internal flash failure?

· 52CE 我爱测

I was performing maintenance on a standby Cisco ASA 5508-X firewall that is part of a failover cluster. Upon reload, I noticed that the cluster status remained failed long after the unit should have recovered. I had datacenter st…

问题原文

原帖链接 · ewwhite · CC BY-SA 3.0

I was performing maintenance on a standby Cisco ASA 5508-X firewall that is part of a failover cluster. Upon reload, I noticed that the cluster status remained failed long after the unit should have recovered.

I had datacenter staff connect a serial console and received the following in reboot loop:

Attempt autoboot: "boot disk0:"
media drive disk0: not present
boot: cannot determine first file name on device "disk0:"
autoboot: All boot attempts have failed.

This is definitely new to me, as I was used to a low failure rate on the old ASA 5505 and 5510 firewalls.

This unit is a failover device and doesn't have a current SmartNet. However, what's the best way to recover from this type of failure? Services are not impacted at the moment, but I couldn't find any straightforward procedures to follow.

社区高分解答

原帖链接 · rnxrx · CC BY-SA 3.0

The boot flash (disk0) on that is an internal eUSB. I don't have a 5508-X handy to see if it can be swapped out easily or if it was soldered in. You might be able to get away with using a USB thumb drive connected to one of the external ports and adjusting boot variables accordingly.

You should be able to format the drive on the primary box and copy the software image (nb - it's just FAT32). This will get you to where you should be able to convince the bad box to boot, at which point you can restore the configuration and drop back into the standby role.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2016-12-19)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。