大网数据广告活动
服务器运维问答

How to restart service after some time?

· 52CE 我爱测

We have multiple systems that suffer from a firmware bug. The vendor is aware of the problem and will fix the firmware bug. Until then we have to live with a workaround: restart the relevant service some time after bootup. There …

问题原文

原帖链接 · uli42 · CC BY-SA 4.0

We have multiple systems that suffer from a firmware bug. The vendor is aware of the problem and will fix the firmware bug. Until then we have to live with a workaround: restart the relevant service some time after bootup.

There are mechanisms in systemd to control the restart of a failed service but they are not of help here because the service starts successfully. Just delaying the start of the service by - say - 1 minute does not help, it needs to be started twice.

So what's the best way to automatically restart a service after the system is up?

社区高分解答

原帖链接 · John Mahowald · CC BY-SA 4.0

Create a .timer unit to control the .service unit.

Use the same base name as the service, so if the service were called thing, in /etc/systemd/system/foo.timer

[Unit]
Description=Start broken thing twice

[Timer]
OnBootSec=1min
OnBootSec=2min

[Install]
WantedBy=timers.target

Then enable this new timer. systemctl enable thing.timer

As the service remains active even if it has this problem, edit overrides such that it doesn't. systemctl edit thing.service
Which to change is hard to say without seeing the original unit. Perhaps add a ExecStartPost= command that returns 0 only if the device is in a good state. Or change RemainAfterExit=no to force a oneshot to not stay active.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2021-03-29)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。