问题原文
原帖链接 · Some Linux Nerd · CC BY-SA 3.0
I accidentally left two different devices mounted on /opt:
/dev/xvdf on /opt type ext4 (rw,relatime,seclabel,data=ordered)
/dev/md0 on /opt type ext4 (rw,relatime,seclabel,stripe=256,data=ordered)
It would be a problem to umount /dev/md0, and things are using /opt. /dev/md0 should be mounted on top of /dev/xvdf. Any suggestions how I can just unmount /dev/xvdf?
Tried:
[root@redacted ~]# umount /dev/xvdf
umount: /dev/xvdf: umount failed: Invalid argument
[root@redacted ~]# mount --move /dev/xvdf /temp
mount: bad option. Note that moving a mount residing under a shared
mount is unsupported.
Also I've had AWS support for volumes yell at me about force detaching in-use volumes, so that's not an option.
社区高分解答
原帖链接 · kasperd · CC BY-SA 3.0
You cannot do it atomically. You can however do it with a sequence of mount --move commands. And you will need two other directories to use as mount points.
cp /etc/mtab /root/mtab-before
mkdir /mnt/shuffle-md0 /mnt/shuffle-xvdf
mount --move /opt /mnt/shuffle-md0
mount --move /opt /mnt/shuffle-xvdf
mount --move /mnt/shuffle-md0 /opt
umount /mnt/shuffle-xvdf
cp /etc/mtab /root/mtab-after
Notice that the /etc/mtab entry for /dev/xvdf may end up looking pretty weird in the end. So I recommend you create a copy of /etc/mtab before you start such that you can reconstruct that entry once you are done.
Anything opening paths through /opt while you are shuffling around the mount points may get unexpected results. But files and directories which were opened before you started will be unaffected by this maneuver.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
