问题原文
原帖链接 · Franck Dernoncourt · CC BY-SA 3.0
I am trying to translate the SSH command:
ssh -N -L 1521:server1.com:1521 [email omitted]
into PuTTY.
-N: Do not execute a remote command. This is useful for just forwarding ports (protocol version 2 only).-L[bind_address:]port:host:hostport: Specifies that the given port on the local (client) host is to be forwarded to the given host and port on the remote side.
The command first SSH to [email omitted], which in turn connect to server1 so that it fowarrds port 1521 (server behind NAT).
In a more abstract way, the command could be written as:
ssh -L MY_LOCAL_PORT:FOREIGN_ADDRESS:FOREIGN_PORT MYUSER@SSH_SERVER
I tried to write the following PuTTY command:
putty -N -D 1521 -P 1521 server2.com [email omitted]
with:
-N: suppress starting a shell or command.-D: set up SOCKS-based dynamic port forwarding on a local port.-P: specify a port number
according to the PuTTY manual.
However I get:
What could be the issue?
I disabled the firewall, and checked that putty.exe allowed to communicate with Internet.
Using the PuTTY GUI, the tunnel works with the following configuration:
已采纳解答
原帖链接 · ALex_hha · CC BY-SA 3.0
I am trying to translate the SSH command
ssh -N -L 1521:server1.com:1521 [email omitted]into PuTTY.
If all you need is just forwarding port - you can use plink instead
> plink.exe -ssh -N -L 1521:server1.com:1521 [email omitted]
I'd curious how to fix the putty.exe command as well
the same things
> G:\putty.exe -ssh -P 2222 -N -L :2222:192.168.88.130:2222 [email omitted] -i C:\Users\ALex\.ssh\node1.ppk
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
