大网数据广告活动
服务器运维问答

packets sent on virtual IP don't hit iptables rule

· 52CE 我爱测

I have a virtual interface eth1:3 with IP address 222.192.124.3 , I have set up an iptables rule to log packets coming on that interface using the interface's IP (I know iptables doesn't care about virtual interfaces labels), lik…

问题原文

原帖链接 · mdeous · CC BY-SA 4.0

I have a virtual interface eth1:3 with IP address 222.192.124.3, I have set up an iptables rule to log packets coming on that interface using the interface's IP (I know iptables doesn't care about virtual interfaces labels), like this:

iptables -A INPUT -d 222.192.124.3 -j LOG --log-level warning --log-prefix "VIP3-IN: "

When I run tcpdump and send packets on this IP from another machine, I see them, so I assume they are received and handled properly by the kernel, but iptables never logs these packets, and when I run iptables -nvL, the packets count for that rule isn't incremented, like if they never hit the rule (or like if iptables doesn't even see packets coming on that interface).

I first thought of another rule matching the packet, and thus handling it before it hits the LOG rule, so I removed every iptables rule and added only the logging rule, with no more success.

Server is running on RHEL 6.2, with a 2.6.32 kernel, virtualized on VMware ESX.

Here is the full output of iptables -nvL:

Chain INPUT (policy ACCEPT 40 packets, 2891 bytes)
  pkts bytes target     prot opt in     out     source               destination
  0     0    LOG        all  --  *      *       0.0.0.0/0            222.192.124.3 LOG flags 0 level 4 prefix `VIP3-IN: '

Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
  pkts bytes target     prot opt in     out     source               destination

Chain OUTPUT (policy ACCEPT 34 packets, 3816 bytes)
  pkts bytes target     prot opt in     out     source               destination

And here is a sample of the tcpdump's output showing the incoming packets (tcpdump -n -nn -vvv -i eth1 "host 203.0.59.135"):

10:26:01.259409 IP (tos 0x50, ttl 121, id 26746, offset 0, flags [DF], proto TCP (6), length 52)
    203.0.59.135.62332 > 222.192.124.3.8888: Flags [S], cksum 0x8da8 (correct), seq 3373891789, win 8192, options [mss 1460,nop,wscale 8,nop,nop,sackOK], length 0

And finally, the ifconfig eth1:3 output:

eth1:3    Link encap:Ethernet  HWaddr 00:50:56:AC:35:35
      inet addr:222.192.124.3  Bcast:222.192.127.255  Mask:255.255.252.0
      UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1

UPDATE:


(source: austintek.com)

Helped by the above diagram, I've setup iptables rules in different tables to see where the packets are going. I've come up with the following script:

IPT_FILTER="iptables -t filter"
IPT_MANGLE="iptables -t mangle"
IPT_NAT="iptables -t nat"

$IPT_FILTER -F
$IPT_FILTER -X
$IPT_FILTER -A INPUT -d 222.192.124.0/22 -j LOG --log-prefix "DEBUG filter: "
$IPT_FILTER -Z

$IPT_MANGLE -F
$IPT_MANGLE -X
$IPT_MANGLE -A PREROUTING -d 222.192.124.0/22 -j LOG --log-prefix "DEBUG mangle/prerouting: "
$IPT_MANGLE -A INPUT -d 222.192.124.0/22 -j LOG --log-prefix "DEBUG mangle/input: "
$IPT_MANGLE -Z

$IPT_NAT -F
$IPT_NAT -X
$IPT_NAT -A PREROUTING -d 222.192.124.0/22 -j LOG --log-prefix "DEBUG nat/prerouting: "
$IPT_NAT -Z

And it appears that packets go through the mangle/PREROUTING and nat/PREROUTING tables, but don't hit the mangle/INPUT table, so I guess it takes the "No" branch on the "Data for the firewall". And being by no means a network or system expert (at most a power-user), this is where I get lost and don't understand what's going on...

FINAL EDIT (solution)

As suggested by @nodens in their answer, the problem was caused by RPF being in "Strict" mode... So much headaches for such a simple setting...

已采纳解答

原帖链接 · nodens · CC BY-SA 3.0

Are you sure there is no matching rule in other tables, like mangle or nat ? You could also try to log every paquet coming in INPUT, or even better, try the TRACE target in raw table (PREROUTING chain), if that is available on RHEL 6

Edit (I can't add a comment yet) :

OK, so the packet hit the interface, but it's not considered as a one the should be treated locally. Check your routing table, maybe you don't have a scope link route to this network, or the packet is dropped by the kernel because of RPF filters (this could happen depending of the network topology) : check https://access.redhat.com/site/solutions/53031

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2014-04-04)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0 / CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。