问题原文
原帖链接 · Jay Bhardwaj · CC BY-SA 3.0
If we have a vSAN created on Microsoft Hypervisor and Virtual FC Ports have been assigned to VMs, can we directly map a LUN to the VMs bypassing the Hypervisor? i.e. The Hypervisor's disk management should not display these as Physical Drives.
The array is connected to the Hypervisor through an NPIV enabled switch and the Host adapter is also NPIV enabled.
已采纳解答
原帖链接 · BaronSamedi1958 · CC BY-SA 3.0
You should be able to do that. Good guide here:
https://technet.microsoft.com/en-us/library/dn551169%28v=ws.11%29.aspx
I'd still leave all the storage mgmt to hypervisor and deal with VHDX only. With shared VHDX, and major improvements around it in WS2016 you don't need raw access to FC anymore. IMHO.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
