大网数据广告活动
服务器运维问答

HP smart array p212 raid controller. Only two arrays possible? because of missing RAM on raid card?

· 52CE 我爱测

I bought a HP Proliant gen8 microserver. In it I installed 1 * 500GB SSD connected to SATA port 5 as a bootable disk and 4 * 3TB HDD connected to a HP smart array p212. What I would like to do is create 1 array using HDD 1 and 2 …

问题原文

原帖链接 · tinus087 · CC BY-SA 4.0

I bought a HP Proliant gen8 microserver. In it I installed 1 * 500GB SSD connected to SATA port 5 as a bootable disk and 4 * 3TB HDD connected to a HP smart array p212.

What I would like to do is create 1 array using HDD 1 and 2 as a RAID 1 configuration. The other hard drives will contain data that does not need mirroring and may be in a RAID 0 configuration, one array for HDD 3 and one array for HDD 4. This would become array A (RAID HDD 1 and 2), array b (RAID 0, HDD 3) and array c (RAID 0, HDD 4). I was able to do this on the soft RAID functionality. But using that also introduced other issues.

My issue is that I do not get the posibility for creating array c. It will let me create array a and array b. And it will show me that HDD 4 is a unassigned disk. In the image below you can see that the 'create array' button is gone.

Current array config

I am able to create array A and array B both in RAID 1 and use all 4 HDD's. So connecting to all drives is not an issue.

Could the fact that I am not using any cache memory on the p212 card be the issue? From what I understand this would mainly upgrade your throughput of read and write data.

If I do need this RAM module, do I realy need a backup battery to get it operational like the seller for the card is telling me? From what I understand the battery is only needed in case of a power outage and it is not mandatory. From a risk perspective I am willing to take the risk of power outage because I would not mind if some data gets scrambled since this system would be a backup for photo's on mobile devices. The other data on the RAID 0 disks are more of a 'nice to have' nature, so data loss on those disks wouldn't matter anyway.

Thanks in advance.

已采纳解答

原帖链接 · batistuta09 · CC BY-SA 4.0

Only 2 arrays (logical volumes as per HPE) are supported without cache memory. Check controller specifications: https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04111625

Logical Volumes Supported

Zero Memory, Up to 2 logical volumes

256mb cache, Up to 64 logical volumes

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2019-03-06)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。