大网数据广告活动
服务器运维问答

How do I assign specific IP address to my OpenVPN server?

· 52CE 我爱测

I'm trying to setup an OpenVPN server which would dynamically assign clients their IP addresses from given range and I need the server to have a specific static IP address which does not lie at the start of the address range (e.g…

问题原文

原帖链接 · mike · CC BY-SA 3.0

I'm trying to setup an OpenVPN server which would dynamically assign clients their IP addresses from given range and I need the server to have a specific static IP address which does not lie at the start of the address range (e.g. 192.168.0.200 instead of 192.168.0.1). Here's my server configuration file:

mode server
port 1134
proto tcp6-server
dev tap
ca ca.crt
cert server.crt
key server.key
dh dh1024.pem
server 192.168.0.0 255.255.255.0
; the following line does not work :-(
ifconfig 192.168.0.200 255.255.255.0
client-to-client
duplicate-cn
keepalive 10 120
cipher AES-256-CBC
comp-lzo
max-clients 32
verb 15
mute 10

After studying the documentation and examples on the net I thought the "ifconfig ..." line would do the trick, but openvpn keeps assigning 192.168.0.1 to the virtual interface (tap0). During openvpn server initialization, this line can be seen:

Fri Apr  4 14:58:07 2014 us=410085 /sbin/ifconfig tap0 192.168.0.1 netmask 255.255.255.0 mtu 1500 broadcast 192.168.0.255

Why is openvpn ignoring the "ifconfig ..." line? I don't know if it is relevant, but I use openvpn 2.3 and Ubuntu OS.

Any suggestions?

已采纳解答

原帖链接 · Zoredache · CC BY-SA 3.0

I point you to the documentation for the --server option. If you want to manually specify things do not use the --server option. Instead manually put in the directives you want. See the full man page for a listing of what --server does.

   --server network netmask
          A helper directive designed to  simplify  the  configuration  of
          OpenVPN's  server  mode.   This directive will set up an OpenVPN
          server which will allocate addresses to clients out of the given
  ->>>>   network/netmask.   The  server itself will take the ".1" address
          of the given network for use as the server-side endpoint of  the
          local TUN/TAP interface.

          For example, --server 10.8.0.0 255.255.255.0 expands as follows:

               mode server
               tls-server
               push "topology [topology]"

               ...

               if dev tap OR (dev tun AND topology == subnet):
                 ifconfig 10.8.0.1 255.255.255.0
                 if !nopool:
                   ifconfig-pool 10.8.0.2 10.8.0.254 255.255.255.0
                 push "route-gateway 10.8.0.1"

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2014-04-04)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。