大网数据广告活动
服务器运维问答

How can I determine if an iscsi device is a mounted Linux filesystem?

· 52CE 我爱测

EDIT: This is on a Debian 7 sytstem (more accurately Proxmox hypervisor https://www.proxmox.com/en/ ) 2.6.32-48-pve kernel. I have a disk partition as an iscsi target on my backend infiniband storage. I've mounted the target loca…

问题原文

原帖链接 · Server Fault · CC BY-SA 3.0

EDIT: This is on a Debian 7 sytstem (more accurately Proxmox hypervisor https://www.proxmox.com/en/) 2.6.32-48-pve kernel.

I have a disk partition as an iscsi target on my backend infiniband storage. I've mounted the target locally on the initiator (on /mnt/iscsi). If I need to reboot the initiator, I need to unmount /mnt/iscsi and then logout of the portal prior to rebooting (at least it was this way a couple years ago. been a while since I've worked with iscsi).

How can I determine which filesystems are mounted over iscsi? The regular mount command just displays the block device which was created by the initiator eg: /dev/sdc.

/dev/sdc on /mnt/iscsi type ext4 (rw,relatime,barrier=1,data=ordered)

I'd like to automate the unmount/logout prior to a reboot but this information is not enough to determine if the filesystem in question needs to be run through iscsiadm ... --logout after unmounting.

已采纳解答

原帖链接 · Deeh · CC BY-SA 3.0

Try iscsiadm -m session -P 3 and check the last section "Attached SCSI devices"

Just FYI: If you set iscsid to start on boot you do not need to unmount/logout iSCSI partitions prior to reboot. As long as the partition is in /etc/fstab and has a _netdev option.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2017-01-24)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。