大网数据广告活动
服务器运维问答

NFTABLE issue: IPv6 does not behave like IPv4 with mirror config

· 52CE 我爱测

I have an issue with IPv6 on my server. I have nginx configured to listen on port 443 from IPv4 and IPv6. And it works great: my webiste is available form Internet with TLS enabled. Things get complicated when I activate nftables…

问题原文

原帖链接 · Ricain · CC BY-SA 4.0

I have an issue with IPv6 on my server. I have nginx configured to listen on port 443 from IPv4 and IPv6. And it works great: my webiste is available form Internet with TLS enabled.

Things get complicated when I activate nftables: when I am accessing my website from IPv4 it works, but when I access it from IPv6 connections time out :(

Output of sudo nft list ruleset:

table inet filter {
        chain INPUT {
                type filter hook input priority filter; policy drop;
                meta nftrace set 1
                ct state established,related accept comment "allow established connections"
                iif "lo" accept comment "allow all from localhost"
                iif != "lo" ip daddr 127.0.0.0/8 counter packets 0 bytes 0 drop comment "drop connections to loopback not coming from loopback"
                iif != "lo" ip6 daddr ::1 counter packets 0 bytes 0 drop comment "drop connections to loopback not coming from loopback"
                iifname "tunnel0" accept comment "allow all from VPN"
                udp dport 12345 accept comment "allow VPN on port 12345"
                tcp dport { 22, 80, 443 } accept comment "allow HTTP, HTTPS and SSH on classic ports"
        }

        chain OUTPUT {
                type filter hook output priority filter; policy accept;
        }

        chain FORWARD {
                type filter hook forward priority filter; policy drop;
        }
}

Output of sudo nft monitor trace | grep 443:

trace id 76d7cb1a inet filter INPUT packet: iif "eth0" ether saddr AA:AA:AA:AA:AA:AA ether daddr BB:BB:BB:BB:BB:BB ip6 saddr 2a01:cb09:804b:cd61:CCCC:CCCC:CCCC:CCCC ip6 daddr 2001:CCCC:CCCC:CCCC::CCCC ip6 dscp cs0 ip6 ecn not-ect ip6 hoplimit 45 ip6 flowlabel 0 ip6 nexthdr tcp ip6 length 40 tcp sport 53184 tcp dport 443 tcp flags == syn tcp window 22240

Note I do not have this issue with ssh on port 22. I am running nftables v0.9.8 (E.D.S.) on Debian 11.

I almost spent a day looking for the solution. Any help is welcome! Thank

已采纳解答

原帖链接 · A.B · CC BY-SA 4.0

ICMPv6, which is a protocol over IPv6, implements the link layer resolution using multicast and unicast. Dropping ICMPv6 means there is no resolution available anymore: nodes can't find other nodes in the same LAN. This includes the upstream IPv6 router which can't communicate with the Linux system using IPv6 if ICMPv6 is dropped.

By contrast IPv4 relies on a different protocol: ARP (using broadcast and unicast), which is not over IPv4. So one can drop all of ICMP and suffer no LAN connectivity issue since ARP is unaffected (but one can still suffer from PMTU blackhole and other similar issues when dropping all of ICMP, especially when using tunnels).

So start by enabling all of ICMPv6 then, in a second time once you validate that IPv6 is working again, if you don't want to enable all of it check what to selectively accept in the Neighbor Discovery Protocol (for a non-routing node I would say at least types 134, 135, 136 and 137):

nft add rule inet filter INPUT 'icmpv6 type { 134, 135, 136, 137 } accept'

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2021-09-27)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。