大网数据广告活动
服务器运维问答

iproute rt_table and mark not working on linux

· 52CE 我爱测

I have this configuration which comes from official and unofficial guides and questions readings here and a lot of failed tests. CentOS 7 and Ubuntu server 15 (LAMP and only eth0). /etc/iproute2/rt_tables 1 tunnel0 I PREPARE THE …

问题原文

原帖链接 · fab · CC BY-SA 3.0

I have this configuration which comes from official and unofficial guides and questions readings here and a lot of failed tests. CentOS 7 and Ubuntu server 15 (LAMP and only eth0).

/etc/iproute2/rt_tables

    1   tunnel0

I PREPARE THE ROUTES AND MARKS

ip route add 0.0.0.0/0 dev tun0 table 1
ip rule add from all fwmark 1 table 1
ip route flush cache

(also tried to use table ID, to declare via "10.123.123.x" with the tun0 address and the tun0 gateway...)

IPTABLES

iptables -A PREROUTING -t mangle -p tcp --dport 80 -j MARK --set-mark 1
iptables-save

I see the eth0 ISP public IP, instead of tun0, which I can see forcing a "route add" static route. What am I missing? Thank you.

已采纳解答

原帖链接 · fab · CC BY-SA 3.0

I solved and documented it here: http://aftermanict.blogspot.it/2015/11/bash-iptables-iproute2-and-multiple.html

This will make the kernel permanently route packets, enables multiple routes and even for networks not attested on the machine:

nano /etc/sysctl.conf

net.ipv4.conf.default.rp_filter = 2
net.ipv4.conf.all.rp_filter = 2
net.ipv4.ip_forward = 1

for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 >| $f ; done

This will initialize iptables and in particular mangle and nat, which are needed for marking the traffic:

iptables -F
iptables -t nat -F
iptables -t mangle -F
iptables -X

add the alternative routes editing:

nano /etc/iproute2/rt_tables

Add (names are your references):

1 tunnel0
2 tunnel1

add routes and rules, we use tables IDs instead of names which are more immediate. As you can notice, the gateway is irrelevant, especially for tunnels which can have dynamic gateways:

ip route add 0.0.0.0/0 dev tun0 table 1
ip route add 0.0.0.0/0 dev tun1 table 2

add rules to mark traffic and bind to the corresponding table:

ip rule add from all fwmark 1 table 1
ip rule add from all fwmark 2 table 2
ip route flush cache

check if you like:

ip route show table 1
ip route show table 2
ip rule show

if you miss something, you can delete this way:

ip rule del table 1
ip route flush table 1

NOW THE MISSING PART: THIS WONT WORK:

iptables -A PREROUTING -t mangle -p tcp --dport 80 -j MARK --set-mark 1

THIS WILL:

iptables -A OUTPUT -t mangle -p tcp --dport 80 -j MARK --set-mark 1
iptables-save

Do you need to select traffic and push it simultaneously in a device / tunnel? No problem, I solved this too:

iptables -A OUTPUT -t mangle -p tcp --dport 10001 -j MARK --set-mark 1
iptables -A OUTPUT -t mangle -p tcp --dport 10002 -j MARK --set-mark 2
iptables -t nat -A OUTPUT -p tcp --dport 10001 -j DNAT --to :80
iptables -t nat -A OUTPUT -p tcp --dport 10002 -j DNAT --to :80

NAT mandatory for reply

iptables -t nat -A POSTROUTING -o $DEV1 -j MASQUERADE
iptables -t nat -A POSTROUTING -o $DEV2 -j MASQUERADE

iptables-save

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2015-11-03)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。