问题原文
原帖链接 · Chris · CC BY-SA 4.0
I hope you can help.. this is more of a sanity check just to verify my line of thinking at the minute. We've got a VMWare cluster setup that is networked to a high performance SAN. Everything performs nicely, running fio write tests I can get IOPS ~60k. So I was setting up a machine on this environment with a generous 16GB of RAM and 10vCPUs. All good so far..
I then attempted to rsync a file around 48GB in size from a remote source to this machine and as the transfer got up to a speed of about 20MB/s I quickly noticed the recipient VM slowing down and load increasing rapidly, to the point the machine became completely unstable and unusable. Trying to trace the route of this issue I logged into the host ESXi of this machine and ran esxtop. What I saw was hugely unexpected -
For the VM in question, there were 31 writes/s with a write latency of 1496.4ms!
However, looking at the actual disks themselves, they don't appear to be under much stress?
So, I guess the million dollar question, why do you think this might be happening, secondly any way I can further diagnose the issue and third, this is abnormal right?!
已采纳解答
原帖链接 · batistuta09 · CC BY-SA 4.0
The latency can be caused by disk provisioning in Virtual Machine. Double check both networking and disk provisioning. I’d recommend Thick provisioned Eager Zeroed type of provisioning to avoid READ->MODIFY->WRITE operations (which is the default for both thin and lazy zeroed provisioning). Typical READ->WRITE can decrease the latency.
Can you provide more information about the networking? Also check the latency of the network.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
