问题原文
原帖链接 · tk0221 · CC BY-SA 4.0
I have a public subnet with ec2 instnaces. The route table has 0.0.0.0/0 IGW (Internet Gateway) as default.
I tested adding a public IP address to my instance (104.27.142.41/32 as reported by curl ifconfig.co) and when I ssh to that ec2 it returns this IP address, which I expected.
1) My question is since NAT is only for outbound traffic, how they communicate when it sends request or quote to other sites?
2) If I switch IGW (internet gateway) to NAT for public subnet will it mask all outbound traffic to NAT IP address and still able to communicate with other sites?
已采纳解答
原帖链接 · MLu · CC BY-SA 4.0
Generally you will have 2 kinds of subnets in a VPC:
Public subnet
- has IGW and optionally NAT
0.0.0.0/0there points to the IGW- hosts (EC2 instances) must have public IP or elastic IP attached as they go directly to the internet
- hosts can be contacted from the internet on this public/elastic IP (if Security Group permits)
Private subnet
- has no IGW or NAT
- the
0.0.0.0/0points to the NAT in the public subnet above - hosts only have private IP and all outbound access is "masked" to the NAT gateway IP
- hosts can initiate connections to the internet but can't be contacted from outside as they are "hidden" behind the NAT (Network Address Translation gateway).
- without NAT configured hosts won't have internet access
Hope that explains it :)
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
