大网数据广告活动
服务器运维问答

How do I monitor RAID status when using an external eSATA RAID5 SATA port multiplier?

· 52CE 我爱测

I am using an external eSATA device which takes 5 SATA drives and presents them as one large HW RAID5 to linux (ubuntu). It uses a SiI3726 chipset. Linux sees and handles the sata device just fine, but I'm wondering if there's an…

问题原文

原帖链接 · Joel K · CC BY-SA 3.0

I am using an external eSATA device which takes 5 SATA drives and presents them as one large HW RAID5 to linux (ubuntu).

It uses a SiI3726 chipset.

Linux sees and handles the sata device just fine, but I'm wondering if there's any way to query/monitor the RAID5 status that's hiding behind this HW RAID.

(from dmesg -- I swear I don't have a 16T single drive...)

[   16.409678] sd 4:0:0:0: [sde] 31255691264 512-byte logical blocks: (16.0 TB/14.5 TiB)
[   16.409727] sd 4:0:0:0: [sde] Write Protect is off
[   16.409730] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[   16.409752] sd 4:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   16.463573]  sde: sde1
[   16.463785] sd 4:0:0:0: [sde] Attached SCSI disk

(from lshw)

   *-disk:4
        description: ATA Disk
        product: SATA H/W RAID5
        physical id: 4
        bus info: scsi@4:0.0.0
        logical name: /dev/sde

Any guidance on peering at the system underneath would be appreciated.

RAID status is my big concern, but actual drive models would be helpful too.

I looked at some libatasmart tools, but couldn't find anything regarding SATA port multipliers in general.

There are utilities to check/set the RAID settings in OSX/Windows, so it is apparently possible. I'm looking for a way to do this in Linux and then potentially add to Nagios, etc.

Here's what the HW looks like:

社区高分解答

原帖链接 · ewwhite · CC BY-SA 3.0

You may be one of the only people who have run into this issue :)

Well, possibly... The use of SATA multipliers is a no-no in server-class systems. Heck, using SATA is a bit risky these days, with ever-increasing drive capacities.

It's not surprising that you've had a difficult time finding information about the SATA port multiplier and monitoring under Linux. Using a SAS expander is the preferred and more supportable approach. Expanders are the norm for server backplanes and external storage JBOD enclosures. As a result, port multipliers are somewhat rare and don't have much mindshare. Adding a layer of abstraction through eSATA almost eliminates any chance of your drives being exposed to the OS, unless the card you're using in the host has OS-lever driver support.

What type of eSATA host card are you using?

At this point, I would rely on the enclosure and visual LED status checks to determine array health. Provide more information about the device, and there's a slim chance status can be communicated to the host (if using the right card), but I wouldn't expect it otherwise.

Edit:

The enclosure being used here does not have LED indicators for drive health. You won't have any way of visually determining drive array status or doing this via your host.

Edit

I reached out to the manufacturer for support:

The OP post a wrong part that is why no one can help :-) See: https://serverfault.com/a/644247/13325

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2014-11-06)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。