大网数据广告活动
服务器运维问答

Recover data from RAID 5 with VMFS data store

· 52CE 我爱测

I own an HP Proliant Gen-6 ML350 server which is not turning on again after a power outage. According to my research it is most likely due to a failue of the power supply backplane or the power supply, alternatively the mainboard…

问题原文

原帖链接 · RosA · CC BY-SA 4.0

I own an HP Proliant Gen-6 ML350 server which is not turning on again after a power outage. According to my research it is most likely due to a failue of the power supply backplane or the power supply, alternatively the mainboard, a CPU or a combination thereof. I'm going to try fixing it but don't hold up great hopes.

I have five 300GB SAS drives in RAID 5 configuration and since my server won't boot up I would like to recover data on that RAID. This data has been backed up weeks ago but I would really like to access the recent data.

However, I do not have another HP system to rebuild the RAID on. I do however have a Windows workstation with an LSI RAID card and I am wondering whether I could plug the five drives into that and then use software such as Stellar Data Recovery to recover it?

An important note is that the server is a VMware ESXi server and the data I wish to recover is from the VMs that were stored within the VMFS datastore.

Do I have any chance at recovering this?

社区高分解答

原帖链接 · batistuta09 · CC BY-SA 4.0

It is possible to move the RAID from one server to another only if the RAID controllers are the same or from the same vendor. Metadata stored on the drives, but the configuration is located in the RAID controller itself. It is better to restore the server itself and then move all data from the old server.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2019-06-05)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。