大网数据广告活动
服务器运维问答

vsftpd single user with multiple directries

· 52CE 我爱测

I want to be able to give my ftp users access to multiple directories. I have my vsftp setup to use virtual users and each user has (or can have) individual config files. The main problem is that the server has a number of virtua…

问题原文

原帖链接 · Matt Indeedhat Holmes · CC BY-SA 4.0

I want to be able to give my ftp users access to multiple directories.

I have my vsftp setup to use virtual users and each user has (or can have) individual config files.

The main problem is that the server has a number of virtual hosts setup on it and i want to give access to some of those directories only to some users and all to other users. For example:

User1
 -/var/www/vhost/domain1.com
 -/var/www/vhost/domain2.com
 -/var/www/vhost/domain3.com
 -/var/www/vhost/domain4.com

User2
 -/var/www/vhost/domain1.com
 -/var/www/vhost/domain4.com

User3
 -/var/www/vhost/domain2.com

Because of the crossover I can't just put the virtual hosts into seperate home folders. I have also tried creating symlinks to the virtual host directories into the separate users home directories but because the users are locked to their home directories you cant follow them

Here is a copy of my vsftpd.config file (local server but same setup)

# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# The target log file can be vsftpd_log_file or xferlog_file.
# This depends on setting xferlog_std_format parameter
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# The name of log file when xferlog_enable=YES and xferlog_std_format=YES
# WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log
#xferlog_file=/var/log/xferlog
#
# Switches between logging into vsftpd_log_file and xferlog_file files.
# NO writes to vsftpd_log_file, YES to xferlog_file
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
chroot_local_user=YES
chroot_list_enable=YES
# (default follows)
chroot_list_file=/etc/vsftpd/chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES
#
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
# sockets, you must run two copies of vsftpd with two configuration files.
# Make sure, that one of the listen options is commented !!
#listen_ipv6=YES

virtual_use_local_privs=YES
user_sub_token=$USER
local_root=/var/www/html/vu/$USER
#hide_ids=YES
guest_enable=YES
guest_username=apache

user_config_dir=/etc/vsftpd/vsftpd-user-conf

pam_service_name=vsftpd.virtual
userlist_enable=YES
tcp_wrappers=YES

pasv_enable=YES
pasv_min_port=64000
pasv_max_port=64321
port_enable=YES

pasv_address=10.0.0.81
pasv_addr_resolve=NO

已采纳解答

原帖链接 · Matt Indeedhat Holmes · CC BY-SA 3.0

i stumbles across a solution to this problem this morning and as in my searches i found several people asking the same question that had not found a god solution i thought is add it here for googlers.

(if anyone knows of a better solution please let me know)

The solution i found HERE is to mount the directories of the virtual hosts in each users respective home directories, this allows the directories to be accessed as if they were actual sub directories of said users home

to mount a directory temporally

mkdir /home/ftp_user/www_dev #create directory to mount too
mount --bind /var/www/dev/ /home/ftp_user/www_dev #mount the directory

if you wish to have this setup perminentry create the directory to mount to and then add a line to /etc/fstab

/var/www/dev  /home/ftp_user/www_dev    none    bind    0       0

hope this helps someone

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2014-01-09)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0 / CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。