大网数据广告活动
服务器运维问答

How to control fans on a NEC server under Linux? With IPMI or BMC?

· 52CE 我爱测

I have an old NEC Express5800/T120d server. It was operating under Windows at reasonable fan speed. I now want to use it at home with Debian, but the fans are always at full speed. The power supply fan is at full speed. With Wind…

问题原文

原帖链接 · Gregory MOUSSAT · CC BY-SA 4.0

I have an old NEC Express5800/T120d server.
It was operating under Windows at reasonable fan speed.
I now want to use it at home with Debian, but the fans are always at full speed.

The power supply fan is at full speed. With Windows it was quiet. There is a data cable between the motherboard and the power supply.
The 1 x rear + 3 x front fans are also at full speed. With Windows they were relatively quiet.
Nothing into the BIOS and IPMI console about fan control. Only the current speed is displayed.

 

I installed lm-sensors and fancontrol without success:

$ sensors-detect
... with YES answer everywhere ...
Driver "coretemp":
  * Chip `Intel digital thermal sensor' (confidence: 9)
Driver "to-be-written":
   * ISA bus, address 0xca2
    Chip `IPMI BMC KCS' (confidence: 8)

So sensors-detect only see unusable devices.

 

Nothing more with pwmconfig:

$ pwmconfig
/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed

 

I installed freeipmi / freeipmi-tools:

$ ipmi-sensors
...
29 | PSU1 Temp        | Temperature                         | 24.00      | C           | 'OK'
...
32 | FAN1             | Fan                                 | 7936.51    | RPM         | 'OK'
33 | FAN2             | Fan                                 | 933.71     | RPM         | 'At or Above (>=) Upper Non-Critical Threshold'
34 | FAN3             | Fan                                 | 933.71     | RPM         | 'At or Above (>=) Upper Non-Critical Threshold'
35 | FAN4             | Fan                                 | N/A        | RPM         | N/A
36 | AIRVOL1          | OEM Reserved                        | 1.31       | unspecified | 'OK'
37 | AIRVOL2          | OEM Reserved                        | 1.31       | unspecified | 'OK'
...

But I don't know how to do more than just looking at the fan speed.
Most IPMI programs included into freeipmi asks for a hostname and user/password but I can not manage to understand what to enter.

 

I also tried upmiutil and ipmitool packages without better success. They all give me the fan status but I do not understand how to configure them.

已采纳解答

原帖链接 · Bertrand SCHITS · CC BY-SA 4.0

The last BIOS update for this serie allow a much better control from inside the BIOS.
Nothing is changed from the OS point of view, so you won't have more ability from IPMI or so.

To be clear: I don't know how to use IPMI from command line, so I don't know if it is possible to change fan speed.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2019-08-21)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。