大网数据广告活动
服务器运维问答

Drive allocation in a RAID 50 array on a HPE DL380 G9

· 52CE 我爱测

I have a DL380 G9 with 12x8TB 3.5" disks: | 1 | 4 | 7 | 10 | | 2 | 5 | 8 | 11 | | 3 | 6 | 9 | 12 | In the Smart Array Controller GUI, if I select all 12 disks and assign them to a RAID 50 array, how will the controller divide the…

问题原文

原帖链接 · rst-2cv · CC BY-SA 4.0

I have a DL380 G9 with 12x8TB 3.5" disks:

| 1 | 4 | 7 | 10 |
| 2 | 5 | 8 | 11 |
| 3 | 6 | 9 | 12 |

In the Smart Array Controller GUI, if I select all 12 disks and assign them to a RAID 50 array, how will the controller divide the disks for the RAID 5 arrays?

Will drives 1-6 and 7-12 inclusive be in two separate RAID 5 arrays, striped for RAID 0? Or will drives 1-3, 4-6, 7-9, and 10-12 be in four separate RAID 5 arrays striped for RAID 0?

If it's the former by default, is it possible to manually configure the array to the latter?

已采纳解答

原帖链接 · batistuta09 · CC BY-SA 4.0

The number of RAID5 sets for RAID0 should be able to configure in raid utility. In your case you can select 2 (6 disks in RAID5), 3 (4 disks in RAID5) or 4(3 disks in RAID5). From perfromance and capacity perspective - 2 RAID5 sets is most preferable in your case.

P.S. RAID50 tolerates only one disk failure (second disk failure from same RAID5 set will bring whole system down)

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2020-01-29)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 4.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。