问题原文
原帖链接 · XOIIO · CC BY-SA 3.0
I've looked for quite a while and for some reason can not find this info anywhere, the HP quickspec document search (Which they recommend) doesn't bring up anything.
I have a proliant DL380 g6, and want to know what the maximum hard drive size is for the smart array P410i controller. (this would be using SATA drives, of course).
社区高分解答
原帖链接 · Mark Wagner · CC BY-SA 3.0
For HP-branded drives: Largest LFF: 8T. Largest SFF: 1TB. Basically the largest offered. Once a controller supports >2TiB (2.2TB) drives (i.e. 4K sector drives) it will support any size (up to 16 exabytes).
See http://h20195.www2.hp.com/v2/gethtml.aspx?docname=c04111725
Relevant notes from that doc:
- HPE Smart Array Firmware version 5.0 or later is required
- To use hard drives exceeding 2.2TB, you must create a boot volume using offline ACU version 8.75 or later. HPE Smart Array controllers do not support boot volumes exceeding 2.2TB.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
