问题原文
原帖链接 · Chris · CC BY-SA 3.0
I am working with Windows 2012 R2 Core and I having problems with setting up my NICs after they got reset.
When I run "netsh int show int" it shows bother Interfaces as Enabled and Connected.
When I run "netsh int ipv4 show config" it only shows the "Loopback Pseudo-Interface 1". I have two NICs on the server "Ethernet 2" and "Ethernet 3". How to enable them show they have an interface in ipv4?
Everything has to be done in either CMD or Powershell. There is no GUI.
Thank you!
社区高分解答
原帖链接 · Net Runner · CC BY-SA 4.0
Everything has to be done in either CMD or Powershell. There is no GUI.
You can use Windows Admin Center, a web-based GUI for Windows Server (Core). Sometimes it may be more convenient compared to CMD or Powershell. Windows Admin Center can be installed on the same host that you need to manage on any other Windows machine in your network. Network management is fully implemented, so it may help you with your problem.
Official overview and step-by-step installation guide might help.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
