大网数据广告活动
服务器运维问答

multipath on iscsi target is it posible?

· 52CE 我爱测

Is it possible to configure multipath on target iscsi SAN? I configured multipath on vmware iscsi initiator and it's work but bouth flows goes on the one SAN storage port with the IP but is it posible to use one ip on different S…

问题原文

原帖链接 · Vladimir · CC BY-SA 3.0

Is it possible to configure multipath on target iscsi SAN? I configured multipath on vmware iscsi initiator and it's work but bouth flows goes on the one SAN storage port with the IP but is it posible to use one ip on different SAN ports becose target is equal IP even if it's bond port (san is oceanstor 5300 v3)?

社区高分解答

原帖链接 · Net Runner · CC BY-SA 3.0

I am not sure about your multi-path on exactly this SAN box model. So, I will elaborate a bit on multi-path in general.

The idea of multi-path (for convenience I'll call it MPIO in the following text) is to create 2 paths from A to B, it can be either storage and compute resourses or VMs and datastore. Thus if one of connections/paths will go down (in case node or NIC died) MPIO feature will provide you with access to you data due to 2 connections ( 1 connection in scenario what I described will be "dead").

If you are looking to learn more about MPIO, or looking to create HA/redundant storage I would recommend to check https://www.starwindsoftware.com/technical_papers/StarWind_MPIO.pdf AFAIK they are using MPIO on iSCSI to provide 2 (or more) paths.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2017-04-22)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。