大网数据广告活动
服务器运维问答

Network stop working after adding bridge interface

· 52CE 我爱测

I'm using Fedora 25, with kernel 4.11.9, kvm and bridge-utils are installed. I'm following the instructions on http://www.linux-kvm.org/page/Networking#Public_Bridge , to get public bridge. I also have Docker installed on my mach…

问题原文

原帖链接 · Diogo Melo · CC BY-SA 3.0

I'm using Fedora 25, with kernel 4.11.9, kvm and bridge-utils are installed. I'm following the instructions on http://www.linux-kvm.org/page/Networking#Public_Bridge, to get public bridge. I also have Docker installed on my machine (which creates its own bridges and virtual interfaces).

When I run ip link add br0 type bridge, everything is ok. But after that, when I run ip link set eth0 master br0 my network stop working. The interface eth0 is the interface I use to access the local network and exit to the internet.

What could be going wrong? How can I troubleshoot this?

已采纳解答

原帖链接 · Tuncay Göncüoğlu · CC BY-SA 3.0

When you add your ethernet interface to your bridge, you need to move your ipv4 settings from your eth0 to br0 as well. So, first clear eth0 settings and then give your ipv4/6 addresses/gateway/etc to your br0.

Personally I find it convenient to use NetworkManager's GUI (or TUI) to do this task.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2017-08-11)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。