大网数据广告活动
服务器运维问答

LVM extend Filesystem: new partition vs. grow existing one

· 52CE 我爱测

I need often to expand a filesystem on a RHEL7-System which runs on VMWare-ESX 6. Normally, i resize the existing virtual disk and run the following cmds: echo "1" > /sys/class/scsi_disk/0:0:X:X/device/rescan pvresize /dev/sdX lv…

问题原文

原帖链接 · C_o_H · CC BY-SA 3.0

I need often to expand a filesystem on a RHEL7-System which runs on VMWare-ESX 6. Normally, i resize the existing virtual disk and run the following cmds:

  1. echo "1" > /sys/class/scsi_disk/0:0:X:X/device/rescan
  2. pvresize /dev/sdX
  3. lvextend -l+100%FREE [VolumeGroup]
  4. resize2fs [MountPoint]

I think this is a convenient solution, but RedHat, VMWare and the majority of other How2s i`ve found, use another way. They create a new partition and add it to the volumegroup instead resize an existing one.

see:

https://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1006371

https://access.redhat.com/solutions/24770

I can't forecast the need of space, so i had to resize pretty often, but i don`t want to create a new partition everytime. There has to be a reason why they use and prefer the second method, which i think, is the worse one. Can anyone tell me why?

kind regards Sascha

已采纳解答

原帖链接 · Speeddymon · CC BY-SA 3.0

Actually in your link to the RedHat article step one says:

Create a physical volume from a free disk or partition (e.g. /dev/sdc1 as a partition)

And in the link for the VMWare article, there is a note at the top:

Note: These steps only apply to EXT3 file systems.

So you can do either/or. The recommended way in almost all cases (as of RHEL7/GRUB2 -- sorry I can't speak for VMWare) is to NOT make a partition as you're then creating a scheme like below.

Disk
|- MBR
|- |- LVM 
|- |- |- Superblock

There was at one time alignment issues by not partitioning, which causes a performance penalty, however you can compensate for the missing partition in LVM for systems that supposedly require one.

The recommendation to partition used to be based on the fact that other OS's won't be able to read the LVM metadata and since there is no partition, will show the disk as being unformatted instead of showing it as having a partition. Actually, even in Linux, if there is no partition, the disk appears to be unused to all of the partitionin tools (fdisk, gdisk, parted, etc). That is because they are designed to look for partitions.

If you're running VMware, I'm assuming you're working with a corporate environment where there are controls in place -- SA's won't have any reason to be monkeying with partitions, and you would never have Windows nor any "other OS" installed onto the machine unless the machine was being repurposed. Therefore, the recommendation to partition does not apply.

The best practice in older versions of RHEL was to partition: https://unix.stackexchange.com/questions/76588/what-is-the-best-practice-for-adding-disks-in-lvm

The revised recommendation of using the whole disk is of course new to RHEL 7, as older systems use GRUB instead of GRUB2. On those older systems the reason to keep partitioning is due to /boot needing to be on a physical disk.

In your case, you're not referring to the OS disks, so even in older systems you can safely keep the LVM metadata directly on the raw disk without any partition.

There is one case where you will want to use a protective MBR, and that is when you are using a LVM on a physical drive in a guest OS, instead of using a vmdk or other type of file. But even as noted by @shodanshok you can use the filter in lvm.conf on the hypervisor to hide those.

If this is a SAN backed physical disk, there is a discussion here: https://access.redhat.com/discussions/1488023

Oracle DBAs also recommend using the raw disk: http://www.dba-oracle.com/real_application_clusters_rac_grid/raw_devices_linux.html

Finally, there is a discussion about this on Reddit as well: https://www.reddit.com/r/sysadmin/comments/292qf2/lvm_physical_disk_vs_partitions/

Pretty much everyone agrees, use the whole disk.

Further reading about booting from an LVM backed disk, if you're interested. https://unix.stackexchange.com/questions/136614/how-does-grub2-load-the-kernel-from-an-lvm-volume

http://forums.fedoraforum.org/showthread.php?t=263325

So to summarize: Use the whole disk. One day, partitioning tools could possibly phased out of use in *nix entirely, in favor of things like zfs tools, btrfs tools, lvm, or some combination of the three.

摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。

资料来源与适用范围

资料来源
Server Fault
适用范围
以原帖系统、软件版本与发布日期为准(2017-01-03)
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY-SA 3.0

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。