问题原文
原帖链接 · Sandra · CC BY-SA 4.0
Based on this answer, blocking port 67 UDP outgoing should be
firewall-cmd --permanent --direct --add-rule ipv4 filter OUTPUT 0 -p udp -m udp --dport=67 -j ACCEPT
firewall-cmd --permanent --direct --add-rule ipv4 filter OUTPUT 1 -j DROP
firewall-cmd --reload
Port 67 UDP is the port a DHCP server uses, so I would like to verify that the port is indeed blocked before I start the DHCP server, so I can experiment with it in a sandbox.
Question
Since it is UDP and below 1024, how can I comfirm it is blocked?
已采纳解答
原帖链接 · user · CC BY-SA 4.0
You can use a tool like netcat (on the server echo test | nc -u <other IP> 67 and on another machine nc -u -l -p 67, or use Wireshark or similar) and see if the message pops up.
摘自公开归档,保留原文语言,版式经整理,外部媒体与邮箱地址已移除。
